Skjønsfjell Eirik Torbjørn Bakken, Chushkin Yuriy, Zontone Federico, Breiby Dag Werner
Department of Physics, Norwegian University of Science and Technology, Høgskoleringen 5, Trondheim 7491, Norway.
The European Synchrotron, CS 40220, 38043 Grenoble, France.
J Synchrotron Radiat. 2018 Jul 1;25(Pt 4):1162-1171. doi: 10.1107/S160057751800588X. Epub 2018 May 31.
A major limitation to the use of coherent X-ray diffraction imaging (CXDI) for imaging soft materials like polymers and biological tissue is that the radiation can cause extensive damage to the sample under investigation. In this study, CXDI has been used to monitor radiation-induced structural changes in metal-coated poly(methyl methacrylate) microspheres. Using a coherent undulator X-ray beam with 8.10 keV photon energy, 14 tomograms at a resolution of ∼30 nm were measured consecutively, which resulted in an accumulated dose of 30 GGy. The three-dimensional images confirmed that the polymer core was strongly affected by the absorbed dose, giving pronounced mass loss. Specifically, as the metal-polymer composite was exposed to the X-ray beam, a bubble-like region of reduced density grew within the composite, almost filling the entire volume within the thin metallic shell in the last tomogram. The bubble seemed to have its initiation point at a hole in the metal coating, emphasizing that the free polymer surface plays an important role in the degradation process. The irradiation of an uncoated polystyrene microsphere gave further evidence for mass loss at the free surface as the radius decreased with increased dose. The CXDI study was complemented by X-ray photon correlation spectroscopy, which proved efficient in establishing exposure dose limits. Our results demonstrate that radiation-induced structural changes at the tens of nanometer scale in soft materials can be followed as a function of dose, which is important for the further development of soft-matter technology.
将相干X射线衍射成像(CXDI)用于对聚合物和生物组织等软材料进行成像的一个主要限制是,辐射会对被研究的样品造成广泛破坏。在本研究中,CXDI已被用于监测金属包覆的聚甲基丙烯酸甲酯微球中辐射诱导的结构变化。使用具有8.10 keV光子能量的相干波荡器X射线束,连续测量了14张分辨率约为30 nm的断层图像,累积剂量达30 GGy。三维图像证实聚合物核心受到吸收剂量的强烈影响,导致明显的质量损失。具体而言,随着金属 - 聚合物复合材料暴露于X射线束,复合材料内部出现一个密度降低的气泡状区域,在最后一张断层图像中几乎占据了薄金属壳内的整个体积。气泡似乎起始于金属涂层的一个孔洞处,这表明聚合物的自由表面在降解过程中起着重要作用。对未包覆的聚苯乙烯微球进行辐照进一步证明了自由表面处的质量损失,因为半径随着剂量增加而减小。CXDI研究得到了X射线光子相关光谱的补充,后者在确定曝光剂量极限方面证明是有效的。我们的结果表明,软材料中几十纳米尺度的辐射诱导结构变化可以作为剂量的函数进行跟踪,这对软物质技术的进一步发展很重要。