Polymer reaction engineering tools to design multifunctional polymer flocculants.

A series of multifunctional terpolymers, poly(N-isopropyl acrylamide/2-(methacryloyloxy) ethyl trimethyl ammonium chloride/N-tert-butylacrylamide) [P(NIPAM-MATMAC-BAAM)], were designed to flocculate and dewater oil sands mature fine tailings (MFT). The hydrophobic BAAM comonomer helped in expelling water from the sediments, while the cationic MATMAC comonomer promoted the charge neutralization of negatively charged particles suspended in MFT. The chemical composition distributions of these terpolymers were designed based on the knowledge of the reactivity ratios of all comonomers, instead of by trial and error, as usually done for most polymer flocculants. The binary reactivity ratios of the comonomers were estimated by synthesizing the binary copolymers with various mole fractions of each comonomer in the feed and experimentally measuring the corresponding fraction of comonomer in the copolymers. Polymer reaction engineering tools were used to minimize compositional drift and guarantee the synthesis of terpolymers with narrow chemical composition distributions suitable for MFT dewatering. Focused beam reflectance measurement (FBRM) experiments showed that terpolymers promoted the formation of large MFT flocs (120 μm). The initial settling rate decreased with the increase in flocculant hydrophobicity, likely because the hydrophobic terpolymer segments did not take part in the bridging of the MFT particles. In contrast, the sediment dewaterability increased with the increase in terpolymer hydrophobicity. This study provides guidelines to design a polymer flocculant from first principles and demonstrates the potential of using hydrophobically modified cationic polymers to flocculate MFT effectively.