Longhi Mariangela, Cova Camilla, Pargoletti Eleonora, Coduri Mauro, Santangelo Saveria, Patanè Salvatore, Ditaranto Nicoletta, Cioffi Nicola, Facibeni Anna, Scavini Marco
Dipartimento di Chimica, Università degli Studi di Milano, Via Golgi 19, 20133 Milano, Italy.
ESRF-The European Synchrotron, 71, Avenue des Martyrs, 38043 Grenoble, France.
Nanomaterials (Basel). 2018 Aug 22;8(9):643. doi: 10.3390/nano8090643.
This work highlights the importance of the hydrophilicity of a catalyst's active sites on an oxygen reduction reaction (ORR) through an electrochemical and physico-chemical study on catalysts based on nitrogen-modified carbon doped with different metals (Fe, Cu, and a mixture of them). BET, X-ray Powder Diffraction (XRPD), micro-Raman, X-ray Photoelectron Spectroscopy (XPS), Scanning Electron Microscopy (SEM), Scanning Transmission Electron Microscopy (STEM), and hydrophilicity measurements were performed. All synthesized catalysts are characterized not only by a porous structure, with the porosity distribution centered in the mesoporosity range, but also by the presence of carbon nanostructures. In iron-doped materials, these nanostructures are bamboo-like structures typical of nitrogen carbon nanotubes, which are better organized, in a larger amount, and longer than those in the copper-doped material. Electrochemical ORR results highlight that the presence of iron and nitrogen carbon nanotubes is beneficial to the electroactivity of these materials, but also that the hydrophilicity of the active site is an important parameter affecting electrocatalytic properties. The most active material contains a mixture of Fe and Cu.
通过对不同金属(铁、铜及其混合物)掺杂的氮改性碳基催化剂进行电化学和物理化学研究,这项工作突出了催化剂活性位点的亲水性对氧还原反应(ORR)的重要性。进行了比表面积测定(BET)、X射线粉末衍射(XRPD)、显微拉曼光谱、X射线光电子能谱(XPS)、扫描电子显微镜(SEM)、扫描透射电子显微镜(STEM)和亲水性测量。所有合成催化剂的特征不仅在于具有以介孔范围为中心的孔隙率分布的多孔结构,还在于存在碳纳米结构。在铁掺杂材料中,这些纳米结构是氮碳纳米管典型的竹状结构,比铜掺杂材料中的纳米结构组织更良好、数量更多且更长。电化学ORR结果表明,铁和氮碳纳米管的存在有利于这些材料的电活性,而且活性位点的亲水性是影响电催化性能的一个重要参数。活性最高的材料包含铁和铜的混合物。