Keyser Andreas, Schopka Simon, Jungbauer Carsten, Foltan Maik, Schmid Christof
Department of Cardiothoracic Surgery, University Medical Center Regensburg, Franz-Josef-Strauss-Allee 11, 93053, Regensburg, Germany.
Department of Internal Medicine II/Cardiology, University Medical Center, Regensburg, Germany.
J Cardiothorac Surg. 2018 Oct 3;13(1):102. doi: 10.1186/s13019-018-0795-5.
In cases of lead failure after implantation of pacemakers (PM) or implantable cardioverter defibrillators (ICD) early lead replacement may be challenging. Puncture of the subclavian vein bears possible complications such as pneumothorax, hematothorax, and damage of leads to be left in place. To avoid venous puncture PM or ICD leads were replaced using a flexible polypropylene sheath (Byrd-sheath).
From January 2010 through December 2017, 55 patients underwent early lead exchange avoiding venous puncture. Early lead exchange for this study was defined as a reintervention within 14 days after the initial lead implantation. The connector of the malfunctioning lead was cut off, and stabilized by a stiff stylet. After having cut off the plastic knob of the stylet, the lead was passed through the polypropylene sheath and the latter advanced into the subclavian vein with gentle rotational movements to gain access to the subclavian vein. After lead removal the polypropylene sheath was replaced by a peel away sheath a new lead inserted.
Overall, 23 defibrillation leads and 34 pacing leads (16 right atrial leads, 17 right ventricular leads, and 1 left ventricular lead) were successfully explanted. Access to the subclavian vein was uneventful, and blood loss minimal. Radiation exposure and fluoroscopy time were also negligible.
The Byrd-sheath technique proved to be safe and successful in providing vein access within 2 weeks after initial lead implantation using the previously implanted lead and thus avoiding puncture of the subclavian vein.
在起搏器(PM)或植入式心脏复律除颤器(ICD)植入后发生导线故障的情况下,早期更换导线可能具有挑战性。锁骨下静脉穿刺可能会带来诸如气胸、血胸以及对留在原位的导线造成损伤等并发症。为避免静脉穿刺,采用了一种柔性聚丙烯鞘(伯德鞘)来更换PM或ICD导线。
从2010年1月至2017年12月,55例患者接受了避免静脉穿刺的早期导线更换。本研究中的早期导线更换定义为在初始导线植入后14天内进行的再次干预。将发生故障的导线连接器切断,并用硬导丝固定。在切断导丝的塑料旋钮后,将导线穿过聚丙烯鞘,然后通过轻柔的旋转动作将鞘推进锁骨下静脉以进入该静脉。移除导线后,将聚丙烯鞘换成可剥离鞘,并插入一根新导线。
总体而言,成功取出了23根除颤导线和34根起搏导线(16根右心房导线、17根右心室导线和1根左心室导线)。进入锁骨下静脉过程顺利,失血量极少。辐射暴露和透视时间也可忽略不计。
事实证明,伯德鞘技术在利用先前植入的导线在初始导线植入后2周内提供静脉通路从而避免锁骨下静脉穿刺方面是安全且成功的。