Aradi E, Lewis-Fell J, Harrison R W, Greaves G, Mir A H, Donnelly S E, Hinks J A
School of Computing and Engineering, University of Huddersfield, Queensgate, Huddersfield HD1 3DH, UK.
School of Mechanical, Aerospace and Civil Engineering, University of Manchester, Sackville Street, Manchester M1 3NJ, UK.
Nanomaterials (Basel). 2018 Dec 14;8(12):1052. doi: 10.3390/nano8121052.
Materials exposed to plasmas in magnetic confinement nuclear reactors will accumulate radiation-induced defects and energetically implanted gas atoms (from the plasma and transmutations), of which insoluble helium (He) is likely to be the most problematic. The large surface-area-to-volume ratio exhibited by nanoporous materials provides an unsaturable sink with the potential to continuously remove both point defects and He. This property enhances the possibilities for these materials to be tailored for high radiation-damage resistance. In order to explore the potential effect of this on the individual ligaments of nanoporous materials, we present results on the response of tungsten (W) nanoparticles (NPs) to 15 keV He ion irradiation. Tungsten foils and various sizes of NPs were ion irradiated concurrently and imaged in-situ via transmission electron microscopy at 750 °C. Helium bubbles were not observed in NPs with diameters less than 20 nm but did form in larger NPs and the foils. No dislocation loops or black spot damage were observed in any NPs up to 100 nm in diameter but were found to accumulate in the W foils. These results indicate that a nanoporous material, particularly one made up of ligaments with characteristic dimensions of 30 nm or less, is likely to exhibit significant resistance to He accumulation and structural damage and, therefore, be highly tolerant to radiation.
在磁约束核反应堆中暴露于等离子体的材料会积累辐射诱导缺陷和高能注入的气体原子(来自等离子体和嬗变),其中不溶性氦(He)可能是最具问题的。纳米多孔材料呈现出的大表面积与体积之比提供了一个不饱和阱,具有连续去除点缺陷和氦的潜力。这一特性增加了这些材料被定制用于高抗辐射损伤的可能性。为了探究这对纳米多孔材料单个韧带的潜在影响,我们展示了钨(W)纳米颗粒(NPs)对15 keV氦离子辐照的响应结果。钨箔和各种尺寸的纳米颗粒同时受到离子辐照,并在750°C下通过透射电子显微镜进行原位成像。在直径小于20 nm的纳米颗粒中未观察到氦泡,但在较大的纳米颗粒和箔中形成了氦泡。在直径达100 nm的任何纳米颗粒中均未观察到位错环或黑点损伤,但在钨箔中发现它们会积累。这些结果表明,一种纳米多孔材料,特别是由特征尺寸为30 nm或更小的韧带组成的材料,可能对氦积累和结构损伤表现出显著抗性,因此对辐射具有高度耐受性。