Degradation of iopamidol by three UV-based oxidation processes: Kinetics, pathways, and formation of iodinated disinfection byproducts.

In this study, the degradation kinetics of iopamidol (IPM) by three different UV-based oxidation processes including UV/hydrogen peroxide (HO), UV/persulfate (PDS) and UV/chlorine (NaClO) were examined and the potential formation of iodinated disinfection byproducts (I-DBPs) in these processes followed by sequential chlorination was comparatively investigated. Increasing pH led to the decrease of IPM degradation rate in UV/NaClO, while it showed negligible impact in UV/PDS and UV/HO. Common background constituents such as chloride ions (Cl), carbonate (HCO) and natural organic matter (NOM) inhibited IPM degradation in UV/HO and UV/PDS, while IPM degradation in UV/NaClO was only suppressed by NOM but not Cl and HCO. The differences in transformation products of IPM treated by hydroxyl radical (HO*), sulfate radical (SO*), as well as Cl* and ClO* generated in these processes, respectively, were also analyzed. The results suggested that hydroxyl radical (HO*) preferred to form hydroxylated derivatives. Sulfate radical (SO4*-) preferred to oxidize amino group of IPM to nitro group, while Cl* and ClO* favored the generation of chlorine-containing products. Moreover, specific I-DBPs (i.e., iodoform (IF) and monoiodacetic acid (MIAA)) were detected in the three processes followed by chlorination. The addition of NOM had little effect on IF formation of three processes, while MIAA formation decreased in all processes except UV/HO. Given that the formation of I-DBPs in UV/NaClO was less than those formed in the other two processes, UV/NaClO seems to be a more promising strategy for effectively removing IPM with alleviation of I-DBPs in treated water effluents.