Tokita Masayuki
Department of Physics, Faculty of Science, Kyushu University, 744 Motooka, Fukuoka, Fukuoka 812-8581, Japan.
Gels. 2016 May 11;2(2):17. doi: 10.3390/gels2020017.
Gel becomes an important class of soft materials since it can be seen in a wide variety of the chemical and the biological systems. The unique properties of gel arise from the structure, namely, the three-dimensional polymer network that is swollen by a huge amount of solvent. Despite the small volume fraction of the polymer network, which is usually only a few percent or less, gel shows the typical properties that belong to solids such as the elasticity. Gel is, therefore, regarded as a dilute solid because its elasticity is much smaller than that of typical solids. Because of the diluted structure, small molecules can pass along the open space of the polymer network. In addition to the viscous resistance of gel fluid, however, the substance experiences resistance due to the polymer network of gel during the transport process. It is, therefore, of importance to study the diffusion of the small molecules in gel as well as the flow of gel fluid itself through the polymer network of gel. It may be natural to assume that the effects of the resistance due to the polymer network of gel depends strongly on the network structure. Therefore, detailed study on the transport processes in and through gel may open a new insight into the relationship between the structure and the transport properties of gel. The two typical transport processes in and through gel, that is, the diffusion of small molecules due to the thermal fluctuations and the flow of gel fluid that is caused by the mechanical pressure gradient will be reviewed.
凝胶成为一类重要的软材料,因为它可见于各种各样的化学和生物系统中。凝胶的独特性质源于其结构,即由大量溶剂溶胀的三维聚合物网络。尽管聚合物网络的体积分数很小,通常仅为百分之几或更低,但凝胶表现出属于固体的典型性质,如弹性。因此,凝胶被视为一种稀固体,因为其弹性远小于典型固体。由于其稀释结构,小分子可以沿着聚合物网络的开放空间通过。然而,除了凝胶流体的粘性阻力外,物质在传输过程中还会受到凝胶聚合物网络的阻力。因此,研究小分子在凝胶中的扩散以及凝胶流体本身通过凝胶聚合物网络的流动具有重要意义。可以很自然地假设,凝胶聚合物网络产生的阻力效应强烈依赖于网络结构。因此,对凝胶内部和通过凝胶的传输过程进行详细研究,可能会为凝胶的结构与传输性质之间的关系带来新的见解。本文将综述凝胶内部和通过凝胶的两个典型传输过程,即由于热涨落导致的小分子扩散以及由机械压力梯度引起的凝胶流体流动。