膝关节置换术后的屈曲不稳定

Flexion Instability After Total Knee Arthroplasty.

机构信息

From the Department of Orthopaedic Surgery, University of Arkansas for Medical Sciences, Little Rock, AR.

出版信息

J Am Acad Orthop Surg. 2019 Sep 1;27(17):642-651. doi: 10.5435/JAAOS-D-18-00347.

Abstract

Flexion instability after total knee arthroplasty (TKA) is caused by an increased flexion gap compared with extension gap. Patients present with recurrent effusions, subjective instability (especially going downstairs), quadriceps weakness, and diffuse periretinacular pain. Manual testing for laxity in flexion is commonly done to confirm a diagnosis, although testing positions and laxity grades are inconsistent. Nonsurgical treatment includes quadriceps strengthening and bracing treatment. The mainstays to surgical management of femoral instability involve increasing the posterior condylar offset, decreasing the tibial slope, raising the joint line in combination with a thicker polyethylene insert, and ensuring appropriate rotation of implants. Patient outcomes after revision TKA for flexion instability show the least amount of improvement when compared with revisions for other TKA failure etiologies. Future work is needed to unify reproducible diagnostic criteria. Advancements in biomechanical analysis with motion detection, isokinetic quadriceps strength testing, and computational modeling are needed to advance the collective understanding of this underappreciated failure mechanism.

摘要

全膝关节置换术后(TKA)的屈曲不稳定是由于屈曲间隙较伸展间隙增加所致。患者表现为反复关节积液、主观不稳定(尤其是下楼时)、股四头肌无力和弥漫性关节周围疼痛。通常通过手动测试屈曲松弛度来确认诊断,尽管测试姿势和松弛度分级不一致。非手术治疗包括股四头肌强化和支具治疗。手术治疗股骨不稳定的主要方法包括增加后髁偏心距、降低胫骨倾斜度、结合较厚的聚乙烯插入物升高关节线,并确保假体的适当旋转。与其他 TKA 失败病因的翻修相比,翻修 TKA 治疗屈曲不稳定的患者术后结果改善最少。需要进一步的工作来统一具有可重复性的诊断标准。需要通过运动检测、等速股四头肌力量测试和计算建模等生物力学分析的进步,来提高对这种被低估的失败机制的综合认识。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索