A fluoroscopic analysis of the length changes of the capsulo-osseous layer of the distal iliotibial band.

PURPOSE

Previous studies have implicated the iliotibial band and its deeper capsulo-osseous layer as key restraints against internal rotation. However, the kinematic properties of the capsulo-osseous layer, throughout knee range of motion, are not currently known. Therefore, the purpose of this research was to quantify the length changes of this structure through various degrees of knee flexion.

METHODS

Ten cadaveric knee specimens were dissected to expose the capsulo-osseous layer of the iliotibial band. Radiopaque beads were embedded, at standardized increments, into the tissue and fluoroscopic images were taken from 0° to 105° of knee flexion in 15° increments. The positions of the beads were identified in each image and the length, width, and area changes of the capsulo-osseous layer were calculated. The data were analyzed as a percent change from 0° and compared across flexion angles using a repeated-measures analysis of variance (α = 0.05).

RESULTS

There was a significant increase in the length of the capsulo-osseous layer at flexion angles greater than 30°, with changes occurring primarily at the level of the femoral insertion. Meanwhile, non-homogenous decreases in width and area were found with increasing flexion angle. The distance between the capsulo-osseous layer insertion on the distal femur and proximal tibia significantly increased from 60° to 105°; maximal changes occurred at 105° [9.64 (4.12) %, p = 0.003].

CONCLUSIONS

The capsulo-osseous layer of the iliotibial band behaves in a non-isometric fashion and this work suggests that tensioning and fixation should occur between 75° and 105° of flexion, if repair or reconstruction is indicated.