Belzile Etienne L, Hébert Mathieu, Janelle Nicolas, Lechasseur Benoit, Dessery Yoann, Ayeni Olufemi R, Corbeil Philippe
CHU de Quebec-Université Laval, 11 cote du Palais, Quebec city, QC, Canada.
Department of Surgery, Division of Orthopaedic Surgery, Faculty of Medicine, Université Laval, 1401 18e rue, Quebec city, QC, G1J 1Z4, Canada.
J Exp Orthop. 2019 Jan 29;6(1):3. doi: 10.1186/s40634-019-0172-x.
The aim of this study was to evaluate the hip joint range of motion after different capsular plication. The study hypothesis proposed that capsular plication after hip arthroscopy may reduce hip external rotation and thus prevent the hip joint instability created by arthroscopic capsulotomies.
Six fresh frozen human cadavers were studied in the intact state (5 males, 1 females) for a total of 12 non-deformity hips tested. They were fixed to the operating room table using a custom-made apparatus. Three Steinman pins were inserted, the first into ASIS, a parallel pin into the distal femur proximal to inter-epicondylar axis and the third pin into the lateral epicondyle. Simulation of arthroscopic capsulotomies was done progressively with simulation of three capsular plication techniques. The first plication technique consisted of a primary plication shift of the antero-lateral capsule. The distal-medial arm of the iliofemoral ligament was shifted toward the proximal-lateral arm. The second plication technique consisted in adding a longitudinal arm to the capsulotomy, between the lateral arm and the medial arm of the iliofemoral ligament, to create a T-shaped capsulotomy. The resulting two triangular capsular flaps were overlaid onto each other by approximately 5 mm, plicated fully and tighly sutured in a double-breast manner. The third plication technique, called redrapping, consisted in excising the inferior capsular triangular flap (previously made in the second technique), and suturing the latero-anterior superior capsular flap to the medial arm of the iliofemoral ligament, superimposing the capsular edges for closure. External rotation of the hip at 0°, 15° and 30° of flexion were obtained after the capsulotomy and each capsular plication technique to quantify the increase in hip stability after plication. Data were assessed using a two-way repeated measure analysis of variance (ANOVAs) and Student's T-test when necessary to determine if the change in external rotation was significantly different.
After capsulotomy, external rotation averaged 26.3°, 29.1° and 31.1° at 0°, 15° and 30° of flexion. With the primary plication shift, external rotation averaged 24.9°, 30.3° and 34.0°. With the two-triangle technique, external rotation averaged 26.1°, 31.9° and 33.3°. With the re-draping technique, external rotation averaged 25.8°, 30.9° and 32.0°. A significant relationship was found between «Plication Technique» and «Angle of flexion» factors for the measured angle of external rotation (P = 0.04). A decomposition of the interaction showed that external rotation decreased at 0° of hip flexion and increased as the hip flexion angle increased. The only significant difference found corresponded to the two triangles technique at 15° flexion (mean difference compared to the non-repaired state = 2.8° ± 3.8° or 8.8% increase in external rotation; P = 0.03).
Different techniques of capsular plication result in a non-significant increase in hip external rotation when compared to unrepaired capsulotomies. Therefore, special attention should be paid at the time of capsular plication, which could be disadvantageous when done overzealously aiming to increase postoperative stability.
本研究旨在评估不同关节囊折叠术后的髋关节活动范围。研究假设提出,髋关节镜检查后的关节囊折叠可能会减少髋关节外旋,从而预防关节镜下关节囊切开术造成的髋关节不稳定。
对6具新鲜冷冻的人体尸体(5男1女)的12个无畸形髋关节进行完整状态下的研究。使用定制装置将尸体固定在手术台上。插入三根斯氏针,第一根插入髂前上棘,一根平行针插入股骨远端髁间轴近端,第三根针插入外侧髁。逐步模拟关节镜下关节囊切开术,并模拟三种关节囊折叠技术。第一种折叠技术包括前外侧关节囊的初次折叠移位。髂股韧带的远内侧臂向近外侧臂移位。第二种折叠技术是在髂股韧带的外侧臂和内侧臂之间的关节囊切开处增加一个纵臂,形成一个T形关节囊切开。将形成的两个三角形关节囊瓣相互重叠约5毫米,完全折叠并紧密缝合成双排。第三种折叠技术称为重新覆盖,即切除下方的三角形关节囊瓣(先前在第二种技术中制作),并将外侧前上方关节囊瓣缝合到髂股韧带的内侧臂,重叠关节囊边缘进行闭合。在关节囊切开术和每种关节囊折叠技术后,获取髋关节在0°、15°和30°屈曲时的外旋角度,以量化折叠后髋关节稳定性的增加。必要时使用双向重复测量方差分析(ANOVA)和学生t检验评估数据,以确定外旋变化是否存在显著差异。
关节囊切开术后,髋关节在0°、15°和30°屈曲时的平均外旋角度分别为26.3°、29.1°和31.1°。采用初次折叠移位时,平均外旋角度分别为24.9°、30.3°和34.0°。采用双三角形技术时,平均外旋角度分别为26.1°、31.9°和33.3°。采用重新覆盖技术时,平均外旋角度分别为25.8°、30.9°和32.0°。对于测量的外旋角度,发现“折叠技术”和“屈曲角度”因素之间存在显著关系(P = 0.04)。相互作用的分解表明,髋关节屈曲0°时外旋减少,随着髋关节屈曲角度增加而增加。发现的唯一显著差异对应于15°屈曲时的双三角形技术(与未修复状态相比的平均差异 = 2.8°±3.8°,外旋增加8.8%;P = 0.03)。
与未修复的关节囊切开术相比,不同的关节囊折叠技术导致髋关节外旋增加不显著。因此,在进行关节囊折叠时应特别注意,过度热心地进行折叠以增加术后稳定性可能是不利的。