Department of NanoEngineering, Center for Memory and Recording Research, Calibaja Center for Resilient Materials and Systems, University of California San Diego, 9500 Gilman Drive, La Jolla, CA, 92093, USA.
Adv Mater. 2019 Apr;31(14):e1807894. doi: 10.1002/adma.201807894. Epub 2019 Feb 13.
Charge collection is critical in any photodetector or photovoltaic device. Novel materials such as quantum dots (QDs) have extraordinary light absorption properties, but their poor mobility and short diffusion length limit efficient charge collection using conventional top/bottom contacts. In this work, a novel architecture based on multiple intercalated chemical vapor deposition graphene monolayers distributed in an orderly manner inside a QD film is studied. The intercalated graphene layers ensure that at any point in the absorbing material, photocarriers will be efficiently collected and transported. The devices with intercalated graphene layers have superior quantum efficiency over single-bottom graphene/QD devices, overcoming the known restriction that the diffusion length imposes on film thickness. QD film with increased thickness shows efficient charge collection over the entire λ ≈ 500-1000 nm spectrum. This architecture could be applied to boost the performance of other low-cost materials with poor mobility, allowing efficient collection for films thicker than their diffusion length.
电荷收集在任何光电探测器或光伏器件中都至关重要。量子点(QD)等新型材料具有非凡的光吸收特性,但由于其迁移率差和扩散长度短,使用传统的顶/底接触方式限制了有效的电荷收集。在这项工作中,研究了一种基于多层嵌入化学气相沉积石墨烯的新型结构,这些石墨烯单层有序地分布在 QD 薄膜中。嵌入的石墨烯层确保在吸收材料的任何点,光载流子都将被有效地收集和传输。与单底石墨烯/QD 器件相比,具有嵌入石墨烯层的器件具有更高的量子效率,克服了已知的扩散长度对薄膜厚度的限制。增加厚度的 QD 薄膜在整个 λ ≈ 500-1000nm 光谱范围内实现了高效的电荷收集。这种结构可以应用于提高其他迁移率差的低成本材料的性能,允许对扩散长度大于其厚度的薄膜进行有效的收集。