Fraczyk Justyna, Kamiński Zbigniew J
Institute of Organic Chemistry, Lodz University of Technology, Zeromskiego 116, 90-924 Lodz, Poland.
Materials (Basel). 2019 Feb 14;12(4):578. doi: 10.3390/ma12040578.
N-lipidated short peptides and amino acids immobilized on the cellulose were used ascatalysts cleaved amide bonds under biomimetic conditions. In order to select catalytically mostactive derivatives a library of 156 N-lipidated amino acids, dipeptides and tripeptides immobilizedon cellulose was obtained. The library was synthesized from serine, histidine and glutamic acidpeptides N-acylated with heptanoic, octanoic, hexadecanoic and (E)-octadec-9-enoic acids.Catalytic efficiency was monitored by spectrophotometric determination of p-nitroaniline formedby the hydrolysis of a 0.1 M solution of Z-Leu-NP. The most active 8 structures contained tripeptidefragment with 1-3 serine residues. It has been found that incorporation of metal ions into catalyticpockets increase the activity of the synzymes. The structures of the 17 most active catalysts selectedfrom the library of complexes obtained with Cu ion varied from 16 derivatives complexed withZn ion. For all of them, a very high reaction rate during the preliminary phase of measurementswas followed by a substantial slowdown after 1 h. The catalytic activity gradually diminished aftersubsequent re-use. HPLC analysis of amide bond splitting confirmed that substrate consumptionproceeded in two stages. In the preliminary stage 24⁻40% of the substrate was rapidly hydrolysedfollowed by the substantially lower reaction rate. Nevertheless, using the most competentsynzymes product of hydrolysis was formed with a yield of 60⁻83% after 48h under mild andstrictly biomimetic conditions.
固定在纤维素上的N-脂化短肽和氨基酸被用作催化剂,在仿生条件下裂解酰胺键。为了选择催化活性最高的衍生物,获得了一个固定在纤维素上的由156种N-脂化氨基酸、二肽和三肽组成的文库。该文库由丝氨酸、组氨酸和谷氨酸肽合成,这些肽用庚酸、辛酸、十六烷酸和(E)-9-十八烯酸进行N-酰化。通过分光光度法测定由0.1M Z-Leu-NP溶液水解形成的对硝基苯胺来监测催化效率。活性最高的8种结构包含带有1-3个丝氨酸残基的三肽片段。已发现将金属离子引入催化口袋可提高合成酶的活性。从用铜离子获得的配合物文库中选出的17种活性最高的催化剂的结构与用锌离子络合的16种衍生物不同。对于所有这些催化剂,在测量的初始阶段反应速率非常高,之后1小时后大幅减慢。后续重复使用后催化活性逐渐降低。酰胺键断裂的HPLC分析证实底物消耗分两个阶段进行。在初始阶段,24⁻40%的底物迅速水解,随后反应速率大幅降低。然而,使用最有效的合成酶,在温和且严格的仿生条件下,48小时后水解产物的产率为60⁻83%。