Wang X J, Zhang Y M, Zhou Y H
First Clinical Division, Peking University School and Hospital of Stomatology & National Clinical Research Center for Oral Diseases & National Engineering Laboratory for Digital and Material Technology of Stomatology & Beijing Key Laboratory of Digital Stomatology, Beijing 100081, China.
Department of Orthodontics, Peking University School and Hospital of Stomatology, Beijing 100081, China.
Beijing Da Xue Xue Bao Yi Xue Ban. 2019 Feb 18;51(1):86-92. doi: 10.19723/j.issn.1671-167X.2019.01.016.
To investigate stability of skeletal hard tissues, dental hard tissues and soft tissues after orthodonticorthognathic treatment in a long term. This study reviewed longitudinal changes in orthodontic-orthognathic patients of skeletal class III malocculsion, using lateral cephalometric radiographs in 3-12 years after treatment in comparison to treatment finishing.
Twenty-two patients with skeletal Class III malocclusion following orthodontic-orthognathic surgery in Peking University School and Hospital of Stomatology from January 1, 2000 to January 1, 2009 were observed. The lateral cephalometric radiographs of the following stages were collected: treatment finishing (T1), 3 to 12 years after treatment (T2). Statistical analyses of cephalometrics were evaluated. Paired student t test was performed by SPSS 17.0.
Data of all the 22 patients were studied in longitudinal timeline after treatment and 3-12 years after treatment. From T1 to T2, we evaluated 11-SN (angle between the upper incisors axis and SN plane), 11-NA angle (angle between the upper incisors axis and NA plane), 11-NA mm (perpendicular distance from upper incisors to NA plane), 11-41 (angle between the upper incisors axis and lower incisors axis), 41-NB angle (angle between lower incisors and NB plane), 41-NB (perpendicular distance from lower incisors to NB plane), 41-MP angle (angle between lower incisors and GoGn plane), and IMPA [angle between lower incisor and mandibular plane (tangent line to submandibular border)]. Most hard tissues of the teeth remained stable but upper anterior teeth angulations decreased, indicating by significantly reducing 11-SN (T1: 110.98°±6.77°; T2: 109.21°±5.80°; P=0.005); reducing 11-NA (T1: 28.31°±6.80°; T2: 26.49°±6.18°; P=0.002); increasing 11-41 (T1: 123.51°±8.14°; T2: 125.7°±10.01°; P=0.035). From T1 to T2, we also evaluated SNA (angle of sella-nasion-A-point), SNB (angle of sella-nasion-B-point), ANB (angle of A-point-nasion-B-point), GoGn-SN (angle between GoGn and SN plane), GoGn-FH (angle between GoGn and Frankfort plane), Y axis (angel between Sella-Gn and Frankfort plane), N-ANS (distance from nasion point to ANS point), ANS-Me (distance from ANS point to Menton point), N-Me (distance from nasion point to Menton point), ANS-Me/N-Me% (proportion of ANS-Me to N-Me), and FMA (angle between Frankfort and mandibular plane), Wits appraisal (horizontal distance between points A and B on functional occlusal plane). Skeletal hard tissues also remained relatively stable, only N-Me value changed significantly with a decreasing facial height (T1: 124.98°±11.98°; T2: 122.4°±11.05°; P=0.024). From T1 to T2, we finally evaluated FH-NsPg angle (angle between NsPg and Frankfort plane), H angle (angel between H line and NB), FH-A'UL angle (angle between A'UL and Frankfort plane), FH-B'LL angle (angle between B'LL and Frankfort plane), UL-LL (angle between UL and LL), UL-EP (distance between UL and E line), LL-EP (distance between LL and E line), Sn-H (perpendicular distance between Sn point and H line), Nls-H (distance of nose-lip-sulcus to H line), Li-H (lower lip to H line), Si-H (lower lip sulcus to H line), and NLA (nasolabial angle, angle of Cm-Sn-UL-point). Soft tissues changes were observed in decreasing UL-EP [T1: (-2.78±2.20) mm; (-3.29±2.44) mm; P=0.02] and H angle (T1: 8.27°±3.71°; 7.32°±3.83°; P=0.006). Other soft tissues remained relatively stable by retruding upper lip position and chin changes with no statistical significance.
Orthodontic-orthognathic treatment can improve esthetics and occlusal function in patients of skeletal class III malocclusion with a stable long-term outcome.
长期研究正畸-正颌治疗后骨骼硬组织、牙齿硬组织及软组织的稳定性。本研究回顾了Ⅲ类错颌畸形正畸-正颌患者的纵向变化,使用治疗结束后3至12年的头颅侧位片,并与治疗结束时进行比较。
观察2000年1月1日至2009年1月1日在北京大学口腔医学院接受正畸-正颌手术的22例Ⅲ类骨骼型错颌畸形患者。收集以下阶段的头颅侧位片:治疗结束时(T1)、治疗后3至12年(T2)。对头影测量数据进行统计学分析。使用SPSS 17.0进行配对t检验。
对22例患者治疗后及治疗后3至12年的纵向数据进行研究。从T1到T2,评估了11-SN(上切牙轴与SN平面的夹角)、11-NA角(上切牙轴与NA平面的夹角)、11-NA mm(上切牙到NA平面的垂直距离)、11-41(上切牙轴与下切牙轴的夹角)、41-NB角(下切牙与NB平面的夹角)、41-NB(下切牙到NB平面的垂直距离)、41-MP角(下切牙与GoGn平面的夹角)和IMPA[下切牙与下颌平面(下颌下缘切线)的夹角]。大多数牙齿硬组织保持稳定,但上前牙角度减小,表现为11-SN显著减小(T1:110.98°±6.77°;T2:109.21°±5.80°;P=0.005);11-NA减小(T1:28.31°±6.80°;T2:26.49°±6.18°;P=0.002);11-41增大(T1:123.51°±8.14°;T2:125.7°±10.01°;P=0.035)。从T1到T2,还评估了SNA(蝶鞍-鼻根点-A点角)、SNB(蝶鞍-鼻根点-B点角)、ANB(A点-鼻根点-B点角)、GoGn-SN(GoGn与SN平面的夹角)、GoGn-FH(GoGn与法兰克福平面的夹角)、Y轴(蝶鞍-颏点与法兰克福平面的夹角)、N-ANS(鼻根点到ANS点的距离)、ANS-Me(ANS点到颏下点的距离)、N-Me(鼻根点到颏下点的距离)、ANS-Me/N-Me%(ANS-Me占N-Me的比例)和FMA(法兰克福与下颌平面的夹角)、Wits值(功能咬合平面上A点和B点之间的水平距离)。骨骼硬组织也保持相对稳定,只有N-Me值随面高降低有显著变化(T1:124.98°±11.98°;T2:122.4°±11.05°;P=0.024)。从T1到T2,最后评估了FH-NsPg角(NsPg与法兰克福平面的夹角)、H角(H线与NB的夹角)、FH-A'UL角(A'UL与法兰克福平面的夹角)、FH-B'LL角(B'LL与法兰克福平面的夹角)、UL-LL(UL与LL的夹角)、UL-EP(UL与E线的距离)、LL-EP(LL与E线的距离)、Sn-H(Sn点到H线的垂直距离)、Nls-H(鼻唇沟到H线的距离)、Li-H(下唇到H线的距离)、Si-H(下唇沟到H线的距离)和NLA(鼻唇角,Cm-Sn-UL点的夹角)。观察到软组织变化为UL-EP减小[T1:(-2.78±2.20)mm;(-3.29±2.44)mm;P=0.02]和H角减小(T1:8.27°±3.71°;7.32°±3.83°;P=0.006)。其他软组织通过上唇位置后缩和下巴变化保持相对稳定,无统计学意义。
正畸-正颌治疗可改善Ⅲ类骨骼型错颌畸形患者的美观和咬合功能,长期效果稳定。