Suppr超能文献

快速气相色谱-常压(光)离子化质谱法测定多溴二苯醚阻燃剂。

Fast gas chromatography-atmospheric pressure (photo)ionization mass spectrometry of polybrominated diphenylether flame retardants.

机构信息

Mouse Imaging Centre, The Hospital for Sick Children, 25 Orde Street, Toronto, ON, M5T 3H7, Canada.

National High Magnetic Field Laboratory, Florida State University, 1800 E Paul Dirac Dr., Tallahassee, FL, 32310, USA.

出版信息

Anal Chim Acta. 2019 May 16;1056:70-78. doi: 10.1016/j.aca.2019.01.007. Epub 2019 Jan 18.

Abstract

Gas chromatography (GC) and mass spectrometry (MS) are powerful, complementary techniques for the analysis of environmental toxicants. Currently, most GC-MS instruments employ electron ionization under vacuum, but the concept of coupling GC to atmospheric pressure ionization (API) is attracting revitalized interest. API conditions are inherently compatible with a wide range of ionization techniques as well high carrier gas flows that enable fast GC separations. This study reports on the application of atmospheric pressure chemical ionization (APCI) and a custom-built photoionization (APPI) source for the GC-MS analysis of polybrominated diphenyl ethers (PBDEs), a ubiquitous class of flame retardants. Photoionization of PBDEs resulted in the abundant formation of molecular ions M with very little fragmentation. Some photo-oxidation was observed, which differentiated critical BDE isomers. Formation of protonated molecules [M+H] did not occur in GC-APPI because the ionization energy of HO (clusters) exceeds the energy of the ionizing photons. Avoiding mixed-mode ionization is a major advantage of APPI over APCI, which requires careful control of the source conditions. A fast GC-API-MS method was developed using helium and nitrogen carrier gases that provides good separation of critical isomers (BDE-49/71) and elution of BDE 209 in less than 7 min (with He) and 15 min (with N). It will be shown that the GC-APPI and GC-APCI methods match the sensitivity and improve upon the selectivity and throughput of established methods for the analysis of PBDEs using standard reference materials (NIST SRM 1944 and SRM 2585) and selected environmental samples.

摘要

气相色谱(GC)和质谱(MS)是分析环境毒物的强大、互补技术。目前,大多数 GC-MS 仪器采用真空中的电子电离,但将 GC 与大气压电离(API)耦合的概念正重新引起人们的兴趣。API 条件本质上与多种电离技术以及能够实现快速 GC 分离的高载气流兼容。本研究报告了大气压化学电离(APCI)和定制的光致电离(APPI)源在多溴二苯醚(PBDEs)的 GC-MS 分析中的应用,PBDEs 是一种普遍存在的阻燃剂。PBDEs 的光致电离导致分子离子 M 的大量形成,几乎没有碎片。观察到一些光氧化,这区分了关键的 BDE 异构体。由于 HO(团簇)的电离能超过致电离光子的能量,因此在 GC-APPI 中不会形成质子化分子 [M+H]。与需要仔细控制源条件的 APCI 相比,APPI 避免了混合模式电离,这是其主要优势。使用氦气和氮气载气开发了快速 GC-API-MS 方法,该方法提供了关键异构体(BDE-49/71)的良好分离,并且在少于 7 分钟(使用 He)和 15 分钟(使用 N)内洗脱 BDE 209。将表明 GC-APPI 和 GC-APCI 方法在灵敏度上与使用标准参考物质(NIST SRM 1944 和 SRM 2585)和选定的环境样品分析 PBDEs 的现有方法相匹配,并提高了选择性和通量。

相似文献

引用本文的文献

本文引用的文献

8

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验