Department of Chemistry , University of Waterloo , Waterloo , Ontario N2L 3G1 , Canada.
Anal Chem. 2019 Apr 2;91(7):4762-4770. doi: 10.1021/acs.analchem.9b00308. Epub 2019 Mar 14.
Microextraction coupled to mass spectrometry (MS) has great potential in analytical chemistry laboratories operating in a variety of fields. Indeed, microextraction methods directly coupled to MS can be of large value given that they can provide not only analyte extraction and enrichment but also effective sample cleanup. In recent years, the practicality in handling high active surface area, versatility, and environmentally friendly features of magnetic dispersive microextraction technologies has contributed to an explosion in the number of methods and technologies reported in the literature for a wide range of applications. However, to the best of our knowledge, no technology to date has been capable of efficiently merging these two rising concepts in a simple and integrated analytical workflow. In this context, the microfluidic open interface is presented for the direct coupling of dispersive magnetic extraction to mass spectrometry. This technology operates under the concept of a flow-isolated desorption volume, which generates a stagnant droplet open to ambient conditions while continuously feeding the ionization source with solvent by means of the self-aspiration process intrinsic of the electrospray ionization (ESI) interface. To improve the efficiency of the final analytical workflow, a novel dispersive magnetic micro- and nanoparticle extraction protocol for biofluid droplets was developed. The final methodology entailed the dispersion of a small amount of magnetic particles (20-70 μg) in a droplet of biofluid (≤40 μL) for extraction, followed by a particle collection step using a homemade 3D-printed holder containing an embedded rare-earth magnet. In the final step, the holder is set on top of the microfluidic open interface (MOI) for desorption in the isolated droplet. Switching the valve transfers the desorbed analytes to the ESI source in less than 5 s. As proof of concept, the completely new setup was applied to the determination of prohibited substances from phosphate-buffered saline (PBS) and human urine using FeO magnetic nanoparticles (50 nm) functionalized with C. The limits of quantitation (LOQs) obtained were in the low-ppb range in all cases, and acceptable precision (≤20%) and accuracy (80-120%) were attained. Also, taking advantage of the fast extraction kinetics provided by the radial diffusion associated with small particles, we employed the methodology for the selective extraction of phosphopeptides from 40 μL of tryptic β-casein digest using 70 μg of magnetic Ti-IMAC microparticles. To conclude, the technology and methodology herein presented provided excellent capabilities comparable to those of other solid-phase microextraction (SPME-MS) approaches while dramatically minimizing the amount of sample and sorbent required per analysis, as well as affording significantly fast extraction times due to the enhanced kinetics of extraction.
微萃取与质谱(MS)相结合在各种领域的分析化学实验室中具有巨大的潜力。实际上,直接与 MS 结合的微萃取方法非常有价值,因为它们不仅可以提供分析物的提取和富集,还可以提供有效的样品净化。近年来,磁性分散微萃取技术在高比表面积处理、多功能性和环境友好性方面的实用性促进了文献中报道的各种方法和技术的数量呈爆炸式增长,适用于广泛的应用领域。然而,就我们所知,迄今为止,还没有一种技术能够以简单和集成的分析工作流程有效地将这两个新兴概念结合起来。在此背景下,本文提出了微流控开放式接口,用于将分散磁性萃取直接与质谱耦合。该技术基于解吸体积的隔离概念,在不断通过自吸过程将溶剂输送到离子源的同时,在环境条件下生成一个静止的液滴,该自吸过程是电喷雾电离(ESI)接口的固有特性。为了提高最终分析工作流程的效率,开发了一种用于生物流体液滴的新型分散磁性微纳米颗粒萃取方案。该方法最终包括在生物流体液滴(≤40 μL)中分散少量磁性颗粒(20-70 μg),然后使用自制的 3D 打印支架收集颗粒,支架中嵌入了稀土磁铁。在最后一步中,将支架放在微流控开放式接口(MOI)顶部,在隔离液滴中进行解吸。切换阀门可在不到 5 秒的时间内将解吸的分析物转移到 ESI 源。作为概念验证,该全新的设置被应用于使用 FeO 磁性纳米粒子(50nm)测定磷酸盐缓冲盐水(PBS)和人尿中的禁用物质,这些纳米粒子用 C 进行了功能化。在所有情况下,检测限(LOQs)均处于低 ppb 范围内,并且可以达到可接受的精密度(≤20%)和准确度(80-120%)。此外,利用与小颗粒相关的径向扩散提供的快速萃取动力学,我们使用该方法从 40 μL 的胰蛋白酶 β-酪蛋白消化物中选择性地萃取 70 μg 的磁性 Ti-IMAC 微粒子。总之,本文提出的技术和方法具有出色的性能,可与其他固相微萃取(SPME-MS)方法相媲美,同时大大减少了每个分析所需的样品和吸附剂的量,并且由于萃取动力学得到增强,萃取时间也大大缩短。