Department of Radiotherapy, CHU-UCLouvain, Namur, Belgium.
Department of Neurosurgery, University Hospital Tivoli, La Louvière, Belgium.
J Appl Clin Med Phys. 2019 May;20(5):27-36. doi: 10.1002/acm2.12576. Epub 2019 Apr 4.
The stereotactic frame represents the mainstay of accuracy for targeting in stereotactic procedures. Any distortion of the frame may induce a significant source of error for the stereotactic coordinates.
To analyze the sources of distortion of the Leksell frame G induced by fixation to the patient's head and to evaluate the clinical impact of frame distortion on the accuracy of targeting in stereotactic procedures.
We analyzed the torques exerted on the fixation screws after frame placement in a series of patients treated stereotactically by an experienced team. We studied the risk for frame bending in an experimental model of stereotactic frame fixation, with increasing torque of fixation screws in a homogeneous and heterogeneous distribution of torques between the four screws. We assessed the impact of expanding dimensions of bending of the Leksell frame both on surgeries utilizing the stereotactic frame, and on radiosurgical procedures with the Gamma Knife.
Frames were fixed clinically at a range of torques of 0.147-0.522 Nm (mean = 0.348 Nm). The torques did not vary significantly with time. Heterogeneity between the two opposite pairs of screws is often limited, but can reach 96.3%. Distortion of the frame may occur even at minimal levels of torque. Heterogeneity between the two opposite pairs of screws will significantly raise the amount of frame distortion. We found a direct correlation between measures of the frame distortion and extend of the deviation from the stereotactic target in clinical models of stereotactic procedures.
Stereotactic frames were subjected to distortion due to the torque used for frame fixation. The risk of distortion increased with the torque used and the heterogeneity between the torques of the fixation screws. Distortion of the frame was a significant source of inaccuracy of targeting for stereotactic procedures in clinical practice.
立体定向框架是立体定向手术中定位精度的主要支柱。任何框架的变形都可能给立体定向坐标带来显著的误差源。
分析 Leksell 框架 G 因固定在患者头部而产生的变形源,并评估框架变形对立体定向手术中靶向准确性的临床影响。
我们分析了一组由经验丰富的团队进行立体定向治疗的患者在放置框架后固定螺丝上的扭矩。我们在立体定向框架固定的实验模型中研究了框架弯曲的风险,在该模型中,固定螺丝的扭矩逐渐增加,而四个螺丝之间的扭矩分布均匀且不均匀。我们评估了 Leksell 框架弯曲扩展尺寸对使用立体定向框架进行的手术以及使用伽玛刀进行的放射外科手术的影响。
框架在 0.147-0.522 Nm(平均 0.348 Nm)的范围内进行临床固定。扭矩随时间没有显著变化。两对相对螺丝之间的异质性通常有限,但可达 96.3%。即使在最小的扭矩水平下,框架也可能发生变形。两对相对螺丝之间的异质性将显著增加框架变形的程度。我们发现,在立体定向手术的临床模型中,框架变形的测量值与从立体定向目标的偏差程度之间存在直接相关性。
立体定向框架因用于框架固定的扭矩而发生变形。变形的风险随着扭矩的使用和固定螺丝扭矩的异质性而增加。框架变形是立体定向手术中靶向不准确的一个重要原因。