Department of Chemical Engineering, Indian Institute of Science Education and Research Bhopal, MP, 462066, India.
Department of Chemical Engineering, Indian Institute of Technology Guwahati, Assam, 781039, India.
J Environ Sci (China). 2019 Jun;80:82-92. doi: 10.1016/j.jes.2018.09.016. Epub 2018 Sep 27.
Ciprofloxacin (CIP) is a broad spectrum synthetic antibiotic drug of fluoroquinolones class. CIP can act as a bidentate ligand forming iron complexes during its degradation in the photo-Fenton process (PFP). This work investigates on PFP for the degradation of CIP to understand the formation mechanism and stability of iron complexes under ultraviolet (UV)-light illumination. A comparison was made with the UV-photocatalysis (UV/TiO) process where CIP doesn't form a complex. In PFP, the optimal dose of Fe and HO were found to be 1.25 and 10 mmol/L with pH of 3.5. An optimal TiO dose of 1.25 g/L was determined in the UV/TiO process. Maximum CIP removal and mineralization efficiency of 93.1% and 47.3% were obtained in PFP against 69.7% and 27.6% in the UV/TiO process. The mass spectra could identify seventeen intermediate products including iron-CIP complexes in PFP, and only seven intermediate products were found in the UV/TiO process with a majority of common products in both the processes. The proposed mechanism supported by the mass spectra bridged the routes of CIP cleavage in the PFP and UV/TiO process, and the decomposition pathway of Fe-CIP chelate complexes in PFP was also elucidated. Both in PFP and UV/TiO processes, the target site of HO radical attack was the secondary-N atom present in the piperazine ring of the CIP molecule. The death of Escherichia coli bacteria was 55.7% and 66.8% in comparison to the control media after 45 min of treatment in PFP and UV/TiO process, respectively.
环丙沙星(CIP)是一种广谱合成抗生素类氟喹诺酮药物。CIP 在光芬顿过程(PFP)中降解时可以作为双齿配体形成铁配合物。本工作研究了 PFP 中 CIP 的降解,以了解在紫外(UV)光照下铁配合物的形成机制和稳定性。与不形成配合物的 UV 光催化(UV/TiO)过程进行了比较。在 PFP 中,Fe 和 HO 的最佳剂量分别为 1.25 和 10 mmol/L,pH 值为 3.5。在 UV/TiO 过程中,确定了最佳 TiO 剂量为 1.25 g/L。在 PFP 中,CIP 的最大去除率和矿化效率分别为 93.1%和 47.3%,而在 UV/TiO 过程中分别为 69.7%和 27.6%。质谱可以在 PFP 中鉴定出十七种包括铁-CIP 配合物在内的中间产物,而在 UV/TiO 过程中仅发现七种中间产物,两种过程中有大多数共同产物。质谱支持的提出的机制连接了 PFP 和 UV/TiO 过程中 CIP 断裂的途径,并阐明了 PFP 中 Fe-CIP 螯合配合物的分解途径。在 PFP 和 UV/TiO 过程中,HO 自由基攻击的目标位点都是 CIP 分子哌嗪环中存在的仲-N 原子。与对照培养基相比,在 PFP 和 UV/TiO 过程中分别处理 45 分钟后,大肠杆菌的死亡率分别为 55.7%和 66.8%。