Qu Sanyin, Ming Chen, Yao Qin, Lu Wanheng, Zeng Kaiyang, Shi Wei, Shi Xun, Uher Ctirad, Chen Lidong
State Key Laboratory of High Performance Ceramics and Superfine Microstructure and CAS Key Laboratory of Materials for Energy Conversion, Shanghai Institute of Ceramics, Chinese Academy of Sciences, Shanghai 200050, China.
Department of Mechanical Engineering, National University of Singapore, Singapore 117576, Singapore.
Polymers (Basel). 2018 Jul 25;10(8):815. doi: 10.3390/polym10080815.
The fundamental understanding of the influence of molecular structure on the carrier transport properties in the field of organic thermoelectrics (OTEs) is a big challenge since the carrier transport behavior in conducting polymers reveals average properties contributed from all carrier transport channels, including those through intra-chain, inter-chain, inter-grain, and hopping between disordered localized sites. Here, combining molecular dynamics simulations and experiments, we investigated the carrier transport properties of doped highly oriented poly(3-hexylthiophene) (P3HT) films with different side-chain regioregularity. It is demonstrated that the substitution of side chains can not only take effect on the carrier transport edge, but also on the dimensionality of the transport paths and as a result, on the carrier mobility. Conductive atomic force microscopy (C-AFM) study as well as temperature-dependent measurements of the electrical conductivity clearly showed ordered local current paths in the regular side chain P3HT films, while random paths prevailed in the irregular sample. Regular side chain substitution can be activated more easily and favors one-dimensional transport along the backbone chain direction, while the irregular sample presents the three-dimensional electron hopping behavior. As a consequence, the regular side chain P3HT samples demonstrated high carrier mobility of 2.9 ± 0.3 cm²/V·s, which is more than one order of magnitude higher than that in irregular side chain P3HT films, resulting in a maximum thermoelectric (TE) power factor of 39.1 ± 2.5 μW/mK² at room temperature. These findings would formulate design rules for organic semiconductors based on these complex systems, and especially assist in the design of high performance OTE polymers.
在有机热电学(OTE)领域,要从根本上理解分子结构对载流子传输特性的影响是一项巨大挑战,因为导电聚合物中的载流子传输行为显示出所有载流子传输通道所贡献的平均特性,这些通道包括通过链内、链间、晶粒间以及无序局域位点之间的跳跃。在此,我们结合分子动力学模拟和实验,研究了具有不同侧链区域规整性的掺杂高度取向聚(3 - 己基噻吩)(P3HT)薄膜的载流子传输特性。结果表明,侧链的取代不仅会影响载流子传输边缘,还会影响传输路径的维度,进而影响载流子迁移率。导电原子力显微镜(C - AFM)研究以及电导率的温度依赖性测量清楚地表明,在规则侧链P3HT薄膜中存在有序的局部电流路径,而在不规则样品中则以随机路径为主。规则侧链取代更容易被激活,有利于沿主链方向的一维传输,而不规则样品则呈现三维电子跳跃行为。因此,规则侧链P3HT样品表现出2.9±0.3 cm²/V·s的高载流子迁移率,比不规则侧链P3HT薄膜中的迁移率高出一个多数量级,在室温下产生的最大热电(TE)功率因子为39.1±2.5 μW/mK²。这些发现将为基于这些复杂系统的有机半导体制定设计规则,特别是有助于高性能OTE聚合物的设计。