Matsunari Kazuya, Watanabe Kota, Hishizume Norihiro, Fujisawa Hidefumi
Department of Radiology, Showa University Northern Yokohama Hospital, Yokohama, Japan.
J Vasc Access. 2019 Nov;20(6):666-671. doi: 10.1177/1129729819839614. Epub 2019 Apr 11.
For subcutaneously implanted central venous ports, some complications due to prolonged placement have been reported. We investigated the appropriate puncture points and port placement sites to prevent catheter fracture in right internal jugular port placement.
This retrospective study included 709 patients who underwent right internal jugular vein puncture and port implantation in the right precordium between 1 May 2012 and 31 March 2018. The cases were divided into undamaged catheter group and damaged catheter group comprising normal and fracture cases, respectively. The catheter angle, distance from the clavicle, tip position, and curvature radius were measured from fluoroscopic images obtained at the time of implantation. The t-test was used in statistical analysis.
Median angles were 91.6° in the undamaged catheter group and 58.0° in the damaged catheter group. Median distances were 26.0 mm in the undamaged catheter group and 36.6 mm in the damaged catheter group. Median tip positions were 51.6 mm in the undamaged catheter group and 37.5 mm in the damaged catheter group. Median curvature radii were 9.2 R in the undamaged catheter group and 7.1 R in the damaged catheter group. Significant differences were found in the angle, height, and curvature radius between the two groups.
Our results indicate that a venipuncture as close to the clavicle as possible (less than 3 cm) and a gentle catheter curve (close to 90° angle) are associated with a lower risk of catheter fracture.
对于皮下植入的中心静脉导管,已有因长期留置而出现一些并发症的报道。我们研究了在右颈内静脉置管时合适的穿刺点和导管置入部位,以预防导管断裂。
这项回顾性研究纳入了2012年5月1日至2018年3月31日期间在右前胸进行右颈内静脉穿刺和导管植入的709例患者。病例分为导管未受损组和受损组,分别包括正常和断裂病例。从植入时获得的荧光透视图像测量导管角度、距锁骨的距离、尖端位置和弯曲半径。采用t检验进行统计分析。
导管未受损组的中位角度为91.6°,受损组为58.0°。未受损组的中位距离为26.0mm,受损组为36.6mm。未受损组的中位尖端位置为51.6mm,受损组为37.5mm。未受损组的中位弯曲半径为9.2R,受损组为7.1R。两组之间在角度、高度和弯曲半径方面存在显著差异。
我们的结果表明,尽可能靠近锁骨(小于3cm)进行静脉穿刺以及导管弯曲平缓(接近90°角)与较低的导管断裂风险相关。