Department of Engineering Mechanics, Zhejiang University, 310027 Hangzhou, China.
Department of Engineering Mechanics, Zhejiang University, 310027 Hangzhou, China; State Key Laboratory of Clean Energy Utilization, Zhejiang University, 310027 Hangzhou, China.
Bioresour Technol. 2019 Sep;288:121496. doi: 10.1016/j.biortech.2019.121496. Epub 2019 May 16.
A comparative kinetic study on the pyrolysis of six algal and lignocellulosic biomasses was performed and six heating rates were employed to obtain the kinetic equations and analyze the compensation effect. Due to complexity, the whole pyrolysis process of algal biomass was divided into two reaction zones in which the analysis was carried out individually. The activation energies were first evaluated within the conversion range of 0.05 to 0.95, which were 125-147 kJ/mol and 113-138 kJ/mol for lignocellulosic biomass and zone-1 of algal biomass, respectively. Regression analysis was also conducted to determine the appropriate kinetic model. Moreover, Z(α) master plots suggested that the nucleation model was dominant at lower and higher temperatures for lignocellulosic biomass. Besides, the pre-exponential factor was calculated and a compensation effect between activation energies and pre-exponential factors was completely observed in zone-2 of algal biomass and partially seen in zone-1 of algal biomass and lignocellulosic biomass.
对六种藻类和木质纤维素生物质的热解进行了比较动力学研究,并采用了六种加热速率来获得动力学方程并分析补偿效应。由于复杂性,将藻类生物质的整个热解过程分为两个反应区,分别进行分析。首先在转化率为 0.05 到 0.95 的范围内评估了活化能,分别为 125-147 kJ/mol 和 113-138 kJ/mol,适用于木质纤维素生物质和藻类生物质的区-1。还进行了回归分析以确定合适的动力学模型。此外,Z(α)主图表明,在较低和较高温度下,木质纤维素生物质的成核模型占主导地位。此外,还计算了指前因子,并在藻类生物质的区-2和藻类生物质和木质纤维素生物质的区-1中观察到了活化能和指前因子之间的完全补偿效应。