Aghilinejad Arian, Aghaamoo Mohammad, Chen Xiaolin
School of Engineering and Computer Science, Washington State University Vancouver, Vancouver, Washington 98686-9600, USA.
Department of Biomedical Engineering, University of California Irvine, Irvine, California 92697-2715, USA.
Biomicrofluidics. 2019 May 24;13(3):034112. doi: 10.1063/1.5092718. eCollection 2019 May.
Deterministic lateral displacement (DLD), which takes advantage of the asymmetric bifurcation of laminar flow around the embedded microposts, has shown promising capabilities in separating cells and particles of different sizes. Growing interest in utilizing high-throughput DLD devices for practical applications, such as circulating tumor cell separation, necessitates employing higher flow rates in these devices, leading to operating in moderate to high Reynolds number () regimes. Despite extensive research on DLD devices in the creeping regime, limited research has focused on the physics of flow, critical size of the device, and deformable cell behavior in DLD devices at moderate to high . In this study, the transport behavior of particles/cells is investigated in realistic high-throughput DLD devices with hundreds of microposts by utilizing multiphysics modeling. A practical formula is proposed for the prediction of the device critical size, which could serve as a design guideline for high-throughput DLD devices. Then, the complex hydrodynamic interactions between a deformable cell and DLD post arrays are investigated. A dimensionless index is utilized for comparing different post designs to quantify the cell-post interaction. It is shown that the separation performances in high-throughput devices are highly affected by as well as the micropost shapes. These findings can be utilized for the design and optimization of high-throughput DLD microfluidic devices.
确定性侧向位移(DLD)利用嵌入微柱周围层流的不对称分支,在分离不同大小的细胞和颗粒方面展现出了良好的能力。人们对将高通量DLD设备用于实际应用(如循环肿瘤细胞分离)的兴趣与日俱增,这就需要在这些设备中采用更高的流速,从而导致在中到高雷诺数() regime下运行。尽管对处于蠕动状态的DLD设备进行了广泛研究,但在中到高时,针对DLD设备中流体物理、设备临界尺寸以及可变形细胞行为的研究却很有限。在本研究中,通过利用多物理场建模,研究了具有数百个微柱的实际高通量DLD设备中颗粒/细胞的传输行为。提出了一个用于预测设备临界尺寸的实用公式,该公式可作为高通量DLD设备的设计指南。然后,研究了可变形细胞与DLD柱阵列之间复杂的流体动力学相互作用。使用一个无量纲指数来比较不同的柱设计,以量化细胞与柱的相互作用。结果表明,高通量设备中的分离性能受以及微柱形状的影响很大。这些发现可用于高通量DLD微流控设备的设计和优化。