Environmental Group, Department of Chemistry, School of Physical Sciences, University of Cape Coast, Cape Coast, Ghana.
School of Chemistry, Physics and Mechanical Engineering, Science and Engineering Faculty, Queensland University of Technology (QUT), Gardens Point, Brisbane, Australia.
Environ Geochem Health. 2019 Dec;41(6):2821-2843. doi: 10.1007/s10653-019-00332-4. Epub 2019 Jun 12.
Analysis of soil samples around pristine and major gold-mining areas in Ghana was carried out for heavy metals as part of a larger soil contamination and metal background study. The surface soil samples were digested using microwave digester (aqua regia) and analyzed with ICP-MS for As, Cd, Hg, Zn, Co, Cu, Mn, Fe, Al, V, Cr, and Pb. The average concentrations (mg/L) for the metals ranged from 0.01 ± 0.01 (Cd) to 86,859.36 ± 47.07 (Fe) for the pristine sites, and 0.01 ± 0.01 (Cd) to 59,006.95 ± 79.06 (Fe) for the mining sites. Mercury was below the detection limit of the analytical instrument (0.029). The concentrations of heavy metals from this study were used to assess their contamination levels, and health risks. The results showed that, the metals ranked by severity of health risks as As > Pb > Cr > Cd. Principal component analysis (PCA) and cluster analysis showed two groupings with the PCA showing metals variability explained by 79.02%. Results from the PCA and Cluster analysis indicate anthropogenic sources of the metals which may be emanating from gold-mining activities. Results from multi-criteria ranking and pattern recognition employing PROMETHEE and GAIA revealed major contribution of the metals from the mining sites with metal variability explained by 72.83%. This is the first time a multi-criteria approach is employed to characterize heavy metal contamination in Ghana, and the study nevertheless brought to light the impact of mining on human health and the environment with implications for other mineral areas around the globe.
加纳原始和主要金矿地区周围的土壤样本进行了重金属分析,作为土壤污染和金属背景研究的一部分。使用微波消解器(王水)对表层土壤样品进行消解,并用 ICP-MS 分析砷、镉、汞、锌、钴、铜、锰、铁、铝、钒、铬和铅。原始地区金属的平均浓度(mg/L)范围为 0.01±0.01(镉)至 86859.36±47.07(铁),采矿区金属的平均浓度(mg/L)范围为 0.01±0.01(镉)至 59006.95±79.06(铁)。汞低于分析仪器的检测限(0.029)。本研究中的重金属浓度用于评估其污染水平和健康风险。结果表明,重金属的健康风险程度依次为 As > Pb > Cr > Cd。主成分分析(PCA)和聚类分析显示,PCA 显示金属变异性可由 79.02%解释,聚类分析显示可分为两组。PCA 和聚类分析的结果表明,这些金属可能源自金矿开采活动。采用 PROMETHEE 和 GAIA 进行多准则排名和模式识别的结果表明,采矿区的金属贡献最大,金属变异性可由 72.83%解释。这是首次采用多准则方法来描述加纳的重金属污染,该研究揭示了采矿活动对人类健康和环境的影响,对全球其他矿产地区具有启示意义。