The New Zealand Institute for Plant and Food Research Limited, Lincoln, New Zealand.
Takasago International Corporation (USA), Rockleigh, NJ, USA.
Food Res Int. 2019 Sep;123:241-250. doi: 10.1016/j.foodres.2019.04.038. Epub 2019 Apr 18.
Encapsulation is commonly used to protect flavor compounds against adverse environmental and processing conditions or to provide controlled release in processed foods. Flavor compounds are released during eating and the release rate depends on food breakdown dynamics in the mouth. Two sequential studies were designed to explore the flavor perception of the same flavor in different encapsulation systems. The studies were focused on the interactions between encapsulation technology, particle size and breakdown processes in the mouth. A peppermint flavor was used as a model flavor and encapsulated with different technologies (spray drying, melt extrusion and fluidized bed drying). The encapsulated flavors and a selected combination were incorporated into a soft chewable candy, keeping the total flavor concentration the same for each sample. The chewable candy samples were presented to naïve panelists (n > 30) for the following two evaluations; (1) comparison of overall flavor perception with a 2-alternative forced choice test; and (2) dynamic evaluation of perceived flavor intensity over time during eating and after swallowing using time intensity. The results showed that the overall and dynamic flavor perceptions are greatly affected by the encapsulation technologies and particle sizes, and can be modulated by combining flavor particles produced by different encapsulation technologies depending on the application and desired flavor profile. The results also showed a large perceived flavor intensity variation between panelists, resembling variation among consumers. In an effort to better understand the relationship between the oral processing patterns and flavor perception, we used the JBMB® typing tool which gives four "Mouth Behavior" groups ("Chewers", "Crunchers", "Smooshers" and "Suckers") and explored to determine whether they would account for the variation. Compared with "Chewers" and "Crunchers", "Smooshers" tended to have a slower increase of flavor intensity during eating and a more gradual drop after swallowing. However, this needs to be confirmed with larger numbers of consumers (including suckers who were excluded in this study because they were not sufficient in numbers) and samples with a longer chew time.
微胶囊化技术通常用于保护风味化合物免受不利的环境和加工条件的影响,或在加工食品中提供控制释放。在食用过程中会释放风味化合物,释放速率取决于口腔中食物的分解动力学。本研究设计了两项连续的研究,以探索不同微胶囊化系统中同一种风味的风味感知。这两项研究的重点是微胶囊化技术、粒径和口腔内分解过程之间的相互作用。薄荷风味被用作模型风味,并采用不同技术(喷雾干燥、熔融挤出和流化床干燥)进行微胶囊化。将包封的风味和选定的组合物掺入软咀嚼糖中,使每个样品的总风味浓度保持相同。将咀嚼糖果样品呈现给不知情的小组(n > 30)进行以下两项评估;(1)使用 2 项强制选择测试比较整体风味感知;(2)在咀嚼和吞咽后使用时间强度动态评估食用过程中感知到的风味强度随时间的变化。结果表明,整体和动态风味感知受微胶囊化技术和粒径的影响很大,可以通过组合不同微胶囊化技术生产的风味颗粒来调节,具体取决于应用和所需的风味特征。结果还表明,小组之间存在很大的感知风味强度变化,类似于消费者之间的变化。为了更好地理解口腔加工模式与风味感知之间的关系,我们使用了 JBMB® 分型工具,该工具提供了四个“口腔行为”组(“咀嚼者”、“嘎吱嘎吱咀嚼者”、“压碎者”和“吮吸者”),并探索确定它们是否会解释这种变化。与“咀嚼者”和“嘎吱嘎吱咀嚼者”相比,“压碎者”在咀嚼过程中风味强度的增加速度较慢,吞咽后风味强度的下降速度较缓慢。然而,这需要用更多的消费者(包括本研究中被排除在外的吮吸者,因为他们的数量不足)和咀嚼时间更长的样品来确认。