Suppr超能文献

基于惯性测量单元的上肢柔性可穿戴外骨骼助力调节

IMU-based assistance modulation in upper limb soft wearable exosuits.

作者信息

Little Kieran, Antuvan Chris W, Xiloyannis Michele, Bernardo A P S de Noronha, Kim Yongtae G, Masia Lorenzo, Accoto Dino

出版信息

IEEE Int Conf Rehabil Robot. 2019 Jun;2019:1197-1202. doi: 10.1109/ICORR.2019.8779362.

Abstract

Soft exosuits have advantages over their rigid counterparts in terms of portability, transparency and ergonomics. Our previous work has shown that a soft, fabric-based exosuit, actuated by an electric motor and a Bowden cable, reduced the muscular effort of the user when flexing the elbow. This previous exosuit used a gravity compensation algorithm with the assumption that the shoulder was adducted at the trunk. In this investigation, the shoulder elevation angle was incorporated into the gravity compensation control via inertial measurement units (IMUs). We assessed our updated gravity compensation model with four healthy, male subjects (age: $26.2 \pm 1.19$ years) who followed an elbow flexion reference trajectory which reached three amplitudes $(25^{\circ}, 50^{\circ}, 75^{\circ})$ and was repeated at three shoulder angles $(25^{\circ}, 50^{\circ}, 75^{\circ})$. To assess the performance of the exosuit; the smoothness, tracking accuracy and muscle activity were investigated during each motion. We found a reduction of biceps brachii activation (24.3%) in the powered condition compared to the unpowered condition. In addition, there was an improvement in kinematic smoothness (0.83%) and a reduction of tracking accuracy (26.5%) in the powered condition with respect to the unpowered condition. We can conclude that the updated gravity compensation algorithm has increased the number of supported movements by considering the shoulder elevation, which has improved the usability of the device.

摘要

与刚性外骨骼相比,柔性外骨骼在便携性、透明度和人体工程学方面具有优势。我们之前的研究表明,一种由电动马达和鲍登缆线驱动的基于织物的柔性外骨骼,在使用者弯曲肘部时可减少其肌肉用力。之前的这种外骨骼使用了重力补偿算法,其假设是肩部在躯干处内收。在本研究中,通过惯性测量单元(IMU)将肩部抬高角度纳入重力补偿控制。我们对四名健康男性受试者(年龄:$26.2 \pm 1.19$岁)评估了我们更新后的重力补偿模型,这些受试者遵循肘部弯曲参考轨迹,该轨迹达到三个幅度($25^{\circ}$、$50^{\circ}$、$75^{\circ}$),并在三个肩部角度($25^{\circ}$、$50^{\circ}$、$75^{\circ}$)下重复。为了评估外骨骼的性能;在每次运动过程中研究了平滑度、跟踪精度和肌肉活动。我们发现,与无动力状态相比,在有动力状态下肱二头肌的激活减少了(24.3%)。此外,与无动力状态相比,在有动力状态下运动学平滑度有所提高(0.83%),跟踪精度降低了(26.5%)。我们可以得出结论,更新后的重力补偿算法通过考虑肩部抬高增加了支持的运动数量,这提高了该设备的可用性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验