Department of Radiation Physics, The University of Texas M. D. Anderson Cancer Center, Houston, TX, 77030, USA.
Department of Imaging Physics, The University of Texas M. D. Anderson Cancer Center, Houston, TX, 77030, USA.
Med Phys. 2019 Nov;46(11):5124-5133. doi: 10.1002/mp.13757. Epub 2019 Sep 11.
To design, manufacture, and evaluate a dynamic magnetic resonance imaging/computed tomography (MRI/CT)-compatible anthropomorphic thorax phantom used to credential MR image-guided radiotherapy (MRIgRT) systems participating in NCI-sponsored clinical trials.
The dynamic anthropomorphic thorax phantom was constructed from a water-fillable acrylic shell that contained several internal structures representing radiation-sensitive organs within the thoracic region. A custom MR/CT visible cylindrical insert was designed to simulate the left lung with a centrally located tumor target. The surrounding lung tissue was constructed from a heterogeneous in-house mixture using petroleum jelly and miniature (2-4 mm diameter) styrofoam balls and the tumor structure was manufactured from liquid PVC plastic. An MR conditional pneumatic system was developed to allow the MRIgRT insert to move in similar inhale/exhale motions. TLDs and radiochromic EBT3 film were inserted into the phantom to measure absolute point doses and dose distributions, respectively. The dynamic MRIgRT thorax phantom was evaluated through a reproducibility study and a feasibility study. Comprehensive end-to-end examinations were done where the phantom was imaged on a CT, an IMRT treatment plan was created and an MR image was captured to verify treatment setup. Then, the phantom was treated on an MRIgRT system. The reproducibility study evaluated how well the phantom could be reproduced in an MRIgRT system by irradiating three times on an Elekta's 1.5 T Unity system. The phantom was shipped to three independent institutions and was irradiated on either an MRIdian cobalt-60 ( Co) or an MRIdian linear accelerator system. Treatment evaluations used TLDs and radiochromic film to compare the planned treatment reported on the treatment planning software against the measured dose on the dosimeters.
The phantom on the Unity system had reproducible TLD doses measurements (SD < 1.5%). The measured TLD to calculated dose ratios from the reproducibility and feasibility studies ranged from 0.93 to 1.01 and 0.96 to 1.03, respectively. Using a 7%/5 mm gamma analysis criteria, the reproducibility and feasibility studies resulted in an average passing rate of 93.3% and 96.8%, respectively. No difference was noted in the results between the MRIdian Co and MRIdian 6 MV linac delivery to the phantom and all treatment evaluations were within IROC-Houston's acceptable criterion.
A dosimetrically tissue equivalent, CT/MR visible, motion-enabled anthropomorphic MRIgRT thorax phantom was constructed to simulate a lung cancer patient and was evaluated as an appropriate NIH credentialing tool used for MRIgRT systems.
设计、制造和评估一种动态磁共振成像/计算机断层扫描(MRI/CT)兼容的人体胸模,用于对参与 NCI 赞助的临床试验的 MRI 引导放射治疗(MRIgRT)系统进行认证。
动态人体胸模由一个可注水的丙烯酸外壳组成,外壳内包含几个代表胸部辐射敏感器官的内部结构。一个定制的 MRI/CT 可见圆柱形插件被设计用来模拟带有中央肿瘤靶的左肺。周围的肺组织由一种不均匀的内部混合材料制成,使用凡士林和微型(2-4 毫米直径)泡沫球,肿瘤结构由液体 PVC 塑料制成。开发了一种磁共振条件气动系统,允许 MRIgRT 插件进行类似的吸气/呼气运动。TLD 和放射性色 EBT3 胶片被插入到体模中,以分别测量绝对点剂量和剂量分布。动态 MRIgRT 胸模通过重复性研究和可行性研究进行了评估。全面的端到端检查包括在 CT 上对体模进行成像、创建调强放疗计划和捕获 MR 图像以验证治疗设置。然后,在 MRIgRT 系统上对体模进行治疗。重复性研究通过在 Elekta 的 1.5T Unity 系统上照射三次来评估体模在 MRIgRT 系统中的可重复性。体模被运往三个独立的机构,并在 MRIdian 钴-60(Co)或 MRIdian 直线加速器系统上进行照射。治疗评估使用 TLD 和放射性色胶片,将治疗计划软件报告的计划治疗与剂量计上测量的剂量进行比较。
Unity 系统上的体模具有可重复的 TLD 剂量测量(SD<1.5%)。重复性和可行性研究中从 TLD 到计算剂量的测量比值范围分别为 0.93 至 1.01 和 0.96 至 1.03。使用 7%/5 毫米伽马分析标准,重复性和可行性研究的平均通过率分别为 93.3%和 96.8%。MRIdian Co 和 MRIdian 6MV 直线加速器对体模的输送结果没有差异,所有治疗评估均在 IROC-Houston 的可接受标准内。
构建了一种具有组织等效性、CT/MR 可见性和运动功能的磁共振引导放射治疗(MRIgRT)胸模,用于模拟肺癌患者,并被评估为一种合适的 NIH 认证工具,用于 MRIgRT 系统。