King Andrew, Evans Jonathan P, Booker Simon J, Beazley James Cs, Jones Robin Js, Thomas William Jc, Smith Christopher
Royal Devon and Exeter NHS Foundation Trust, Exeter, UK.
Shoulder Elbow. 2019 Oct;11(5):372-377. Epub 2018 May 25.
The triceps-on approach for total elbow arthroplasty has gained popularity due to the theoretical benefit of preserving the extensor mechanism. However, there is concern that the exposure may be reduced in comparison to a triceps-off approach and may affect the implant alignment achieved.
Total elbow arthroplasties were implanted in 18 randomised, paired cadaveric elbows using the triceps-on or triceps-off approach. The bones were dissected out and the position of the implants measured relative to anatomical landmarks. The flexion/extension and varus/valgus angles, and the distance of centre of rotation from the anatomic centre of rotation in the sagittal plane for both components were obtained as well as the humeral component rotation relative to the transepicondylar axis.
All humeral components were positioned in external rotation and all ulna components were placed in flexion. Seven components were positioned greater than 5° away from the ideal in one measurement, with no significant difference between the two approach groups.
This unique study showed no significant difference in the alignment of the implants between the two approaches. These results support the theory that the triceps-on approach does not result in larger alignment errors in component positioning when performing total elbow arthroplasty.
全肘关节置换术的经肱三头肌入路因保留伸肌机制的理论优势而受到欢迎。然而,有人担心与经肱三头肌旁入路相比,这种入路的暴露范围可能会减小,并且可能会影响植入物的对线。
使用经肱三头肌入路或经肱三头肌旁入路,在18对随机配对的尸体肘部植入全肘关节假体。解剖出骨骼,并相对于解剖标志测量植入物的位置。获得两个组件在矢状面内的屈伸和内外翻角度、旋转中心与解剖旋转中心的距离,以及肱骨组件相对于经髁轴的旋转角度。
所有肱骨组件均处于外旋位,所有尺骨组件均处于屈曲位。在一次测量中,有7个组件的位置偏离理想位置超过5°,两组入路之间无显著差异。
这项独特的研究表明,两种入路在植入物对线方面无显著差异。这些结果支持了这样一种理论,即在进行全肘关节置换术时,经肱三头肌入路不会导致组件定位出现更大的对线误差。