Liu Peng, Gu Xiaobin, Zhang Zhikai, Rao Jun, Shi Jianping, Wang Bin, Bian Liang
Key Laboratory of Solid Waste Treatment and Resource Recycle, Ministry of Education, South West University of Science and Technology, Mianyang 621010, Sichuan, China.
School of Gemology and Materials Technology, Hebei GEO University, Shijiazhuang 050031, Hebei, China.
ACS Omega. 2019 Sep 5;4(12):14962-14969. doi: 10.1021/acsomega.9b01746. eCollection 2019 Sep 17.
Capric acid (CA) is one of the most promising phase change materials to be used in reducing the energy consumption of buildings due to its suitable phase change temperature and high latent heat. In this paper, a novel shape-stabilized phase change material (SSPCM) is fabricated by "hazardous waste" fly ash (FA) via simple impregnation method along with CA and carbon nanotubes (CNTs). In this composite, raw FA without any modification serves as the carrier matrix to improve structural strength and overcome the drawback of the leakage of liquid CA. Simultaneously, CNTs act as an additive to increase the thermal conductivity of composites. The results of leakage tests indicate that CA was successfully confined as 20 wt % in the composite. Then, various characterization techniques were adopted to investigate the structure and properties of the prepared SSPCM of CA/FA/CNT. Scanning electron microscopy and Fourier transform infrared spectroscopy results showed that CA was well adsorbed into the microstructure of FA, and there was no chemical interaction between the components of the composites. Thermogravimetric analysis results demonstrated that the SSPCM presented good thermal stability. Differential scanning calorimetry results indicated that the melting temperature and freezing temperature of CA/FA/CNT were 31.08 and 27.88 °C, respectively, and the latent heats of CA/FA/CNT during the melting and freezing processes were 20.54 and 20.19 J g, respectively. Moreover, compared to the CA and CA/FA, the heat transfer efficiency of CA/FA/CNT was significantly improved by doping 1, 3, 5, and 7 wt % of CNT. All of the results suggest that CA/FA/CNT possessed comfortable melting and freezing temperatures, excellent thermal stability, high latent heat value, and favorable thermal conductivity, and therefore, it is a suitable thermal storage material for building applications. Simultaneously, CA/FA/CNT can improve the comprehensive utilization level of FA.
癸酸(CA)因其合适的相变温度和高潜热,是用于降低建筑物能耗的最具潜力的相变材料之一。本文通过简单浸渍法,利用“危险废物”粉煤灰(FA)与CA和碳纳米管(CNT)制备了一种新型形状稳定相变材料(SSPCM)。在这种复合材料中,未经任何改性的原始FA用作载体基质,以提高结构强度并克服液态CA泄漏的缺点。同时,CNT作为添加剂来提高复合材料的热导率。泄漏测试结果表明,CA在复合材料中的含量成功限制为20 wt%。然后,采用各种表征技术研究了制备的CA/FA/CNT SSPCM的结构和性能。扫描电子显微镜和傅里叶变换红外光谱结果表明,CA被良好地吸附到FA的微观结构中,复合材料各组分之间没有化学相互作用。热重分析结果表明,该SSPCM具有良好的热稳定性。差示扫描量热法结果表明,CA/FA/CNT的熔点和凝固点分别为31.08和27.88℃,CA/FA/CNT在熔化和凝固过程中的潜热分别为20.54和20.19 J/g。此外,与CA和CA/FA相比,通过掺杂1、3、5和7 wt%的CNT,CA/FA/CNT的传热效率显著提高。所有结果表明,CA/FA/CNT具有适宜的熔化和凝固温度、优异的热稳定性、高潜热值和良好的热导率,因此是一种适用于建筑应用的蓄热材料。同时,CA/FA/CNT可以提高FA的综合利用水平。