Department of Radiation Oncology, Tri-Service General Hospital, National Defense Medical Center, Taipei, Taiwan.
Institute of Clinical Medicine, National Yang-Ming University, Taipei, Taiwan.
Sci Rep. 2019 Oct 2;9(1):14157. doi: 10.1038/s41598-019-50503-7.
The role of diffusion-weighted magnetic resonance imaging (DW MRI) in assessing durable tumor control for patients with hepatocellular carcinoma (HCC) treated with stereotactic ablative radiotherapy (SABR) was not defined. This retrospective study included 34 HCC patients with 45 lesions who had DW MRI data at baseline and within 6 months post-SABR. On the first post-SABR MRI, 13 lesions (28.9%) had a complete response (CR), 12 (26.7%) had a partial response (PR), 17 (37.8%) had stable disease, and 3 (6.7%) had progressive disease by modified Response Evaluation Criteria in Solid Tumors (mRECIST). On subsequent imaging, the response rate improved from 55.6% to 75.6%. The apparent diffusion coefficients (ADCs) (mean ± standard deviation) pre- and post-SABR were 1.43 ± 0.28 and 1.72 ± 0.34 (×10 mm/s), respectively (p < 0.001). An ADC change ≥25% (DW[+]) was identified as a predictor of favorable in-field control (IFC) (1-year IFC, 93.3% vs. 50.0% for DW[-], p = 0.004), but an mRECIST-based positive response (CR and PR) at the first MRI was not (p = 0.130). In conclusion, ADC change on early MRI is closely related to IFC in HCCs treated with SABR. Standardization of the DW MRI protocol, as well as prospective validation studies, are warranted.
弥散加权磁共振成像(DW MRI)在评估接受立体定向消融放疗(SABR)治疗的肝细胞癌(HCC)患者的肿瘤持久控制中的作用尚未明确。本回顾性研究纳入了 34 例 HCC 患者的 45 个病灶,这些患者在 SABR 前后均有 DW MRI 数据。在 SABR 后首次 MRI 检查中,13 个病灶(28.9%)表现为完全缓解(CR),12 个病灶(26.7%)表现为部分缓解(PR),17 个病灶(37.8%)表现为疾病稳定,3 个病灶(6.7%)表现为疾病进展(mRECIST 实体瘤反应评价标准)。在随后的影像学检查中,反应率从 55.6%提高到了 75.6%。SABR 前后 ADC 值(平均值±标准差)分别为 1.43±0.28 和 1.72±0.34(×10 mm/s)(p<0.001)。ADC 变化≥25%(DW[+])被确定为预测靶区内良好控制(IFC)的指标(1 年 IFC 为 93.3%,而 DW[-]为 50.0%,p=0.004),但首次 MRI 时基于 mRECIST 的阳性反应(CR 和 PR)不是(p=0.130)。总之,SABR 治疗 HCC 后早期 MRI 上的 ADC 变化与 IFC 密切相关。需要对 DW MRI 方案进行标准化,并开展前瞻性验证研究。