Jerzy Haber Institute of Catalysis and Surface Chemistry, Polish Academy of Sciences, Niezapominajek 8, PL-30239 Krakow, Poland.
School of Chemistry, University of Bristol, Cantock's Close, Bristol BS8 1TS, United Kingdom.
J Colloid Interface Sci. 2020 Mar 7;562:409-417. doi: 10.1016/j.jcis.2019.11.102. Epub 2019 Nov 26.
Supported lipid bilayers (SLBs) embedded with hydrophobic quantum dots (QDs) undergo temporal structural rearrangement.
Synchrotron X-ray reflectivity (XRR) was applied to monitor the temporal structural changes over a period of 24 h of mixed SLBs of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) / 1-palmitoyl-2-oleoyl-sn-glycero-3-phospho-ethanolamine (POPE) intercalated with 4.9 nm hydrophobic cadmium sulphide quantum dots (CdS QDs). The QD-embedded SLBs (QD-SLBs) were formed via rupture of the mixed liposomes on a positively charged polyethylene imine (PEI) monolayer. Atomic force microscopy (AFM) imaging provided complementary characterization of the bilayer morphology.
Our results show time-dependent perturbations in the SLB structure due to the interaction upon QD incorporation. Compared to the SLB without QDs, at 3 h incubation time, there was a measurable decrease in the bilayer thickness and a concurrent increase in the scattering length density (SLD) of the QD-SLB. The QD-SLB then became progressively thicker with increasing incubation time, which - along with the fitted SLD profile - was attributed to the structural rearrangement due to the QDs being expelled from the inner leaflet to the outer leaflet of the bilayer. Our results give unprecedented mechanistic insights into the structural evolution of QD-SLBs on a polymer cushion, important to their potential biomedical and biosensing applications.
嵌入疏水性量子点 (QD) 的支持脂质双层 (SLB) 会经历时间相关的结构重排。
同步辐射 X 射线反射率 (XRR) 被应用于监测混合 SLB(由 1-棕榈酰基-2-油酰基-sn-甘油-3-磷酸胆碱 (POPC)/1-棕榈酰基-2-油酰基-sn-甘油-3-磷酸乙醇胺 (POPE) 组成)在插入 4.9nm 疏水性硫化镉量子点 (CdS QD) 后的 24 小时内的时间相关结构变化。QD 嵌入的 SLB(QD-SLB)是通过混合脂质体在带正电荷的聚乙烯亚胺 (PEI) 单层上破裂而形成的。原子力显微镜 (AFM) 成像提供了对双层形态的补充表征。
我们的结果表明,由于 QD 掺入引起的相互作用,SLB 结构会随时间发生波动。与不含 QD 的 SLB 相比,在 3 小时孵育时间时,QD-SLB 的双层厚度可测下降,同时散射长度密度 (SLD) 增加。随着孵育时间的增加,QD-SLB 变得越来越厚,这与拟合的 SLD 轮廓一起归因于由于 QD 从双层的内叶层被挤出到外叶层而导致的结构重排。我们的结果为 QD-SLB 在聚合物垫上的结构演化提供了前所未有的机制见解,这对于它们在生物医学和生物传感应用中的潜在应用非常重要。