Division of Sustainable Development (DSD), Hamad Bin Khalifa University (HBKU)/Qatar Foundation (QF), Education City, Qatar.
Qatar Environment and Energy Research Institute, Hamad Bin Khalifa University, Doha, Qatar.
J Air Waste Manag Assoc. 2020 Feb;70(2):228-242. doi: 10.1080/10962247.2019.1704939.
Road traffic is one of the main sources of particulate matter (PM) in the atmosphere. Despite its importance, there are significant challenges in the quantitative evaluation of its contribution to airborne concentrations. In order to propose effective mitigation scenarios, the proportions of PM traffic emissions, whether they are exhaust or non-exhaust emissions, should be evaluated for any given geographical location. In this work, we report on the first study to evaluate particulate matter emissions from all registered heavy duty diesel vehicles in Qatar. The study was applied to an active traffic zone in urban Doha. Dust samples were collected and characterized for their shape and size distribution. It was found that the particle size ranged from few to 600 μm with the dominance of small size fraction (less than 100 μm). In-situ elemental composition analysis was conducted for side and main roads traffic dust, and compared with non-traffic PM. The results were used for the evaluation of the enrichment factor and preliminary source apportionment. The enrichment factor of anthropogenic elements amounted to 350. The traffic source based on sulfur elemental fingerprint was almost 5 times higher in main roads compared with the samples from non-traffic locations. Moreover, PM exhaust and non-exhaust emissions (tyre wear, brake wear and road dust resuspension) were evaluated. It was found that the majority of the dust was generated from tyre wear with 33% followed by road dust resuspension (31%), brake wear (19%) and then exhaust emissions with 17%. The low contribution of exhaust PM emissions was due to the fact that the majority of the registered vehicle models were recently made and equipped with efficient exhaust PM reduction technologies.: This study reports on the first results related to the evaluation of PM emission from all registered diesel heavy duty vehicles in Qatar. In-situ XRF elemental analysis from main, side roads as well as non-traffic dust samples was conducted. Several characterization techniques were implemented and the results show that the majority of the dust was generated from tyre wear, followed by road dust resuspension and then brake wear; whereas exhaust emissions were tremendously reduced since the majority of the registered vehicle models were recently made and equipped with efficient exhaust PM reduction technologies. This implies that policy makers should place stringent measures on old vehicle license renewals and encourage the use of metro and public transportation.
道路交通是大气中颗粒物(PM)的主要来源之一。尽管其重要性不言而喻,但要对其对空气浓度的贡献进行定量评估仍存在重大挑战。为了提出有效的缓解方案,应针对任何特定地理位置评估 PM 交通排放的比例,无论是尾气排放还是非尾气排放。在这项工作中,我们报告了第一项评估卡塔尔所有注册重型柴油车颗粒物排放的研究。该研究应用于多哈市区的一个活跃交通区。采集了灰尘样本并对其形状和粒径分布进行了表征。结果发现,颗粒尺寸范围从几微米到 600 微米,小尺寸部分(小于 100 微米)占主导地位。对侧路和主路交通尘的元素组成进行了现场分析,并与非交通 PM 进行了比较。结果用于评估富集因子和初步源分配。人为元素的富集因子达到 350。与非交通地点的样本相比,主路交通源的硫元素指纹几乎高出 5 倍。此外,还评估了 PM 尾气和非尾气排放(轮胎磨损、刹车磨损和道路灰尘再悬浮)。结果发现,大部分灰尘是由轮胎磨损产生的,占 33%,其次是道路灰尘再悬浮(31%)、刹车磨损(19%),然后是尾气排放(17%)。尾气 PM 排放的低贡献是由于大多数注册车辆模型是最近制造的,并且配备了高效的尾气 PM 减排技术。本研究报告了第一项与评估卡塔尔所有注册柴油重型车辆 PM 排放相关的结果。对主路、辅路和非交通灰尘样本进行了原位 XRF 元素分析。实施了几种表征技术,结果表明,大部分灰尘是由轮胎磨损产生的,其次是道路灰尘再悬浮,然后是刹车磨损;而尾气排放则大大减少,因为大多数注册车辆模型是最近制造的,并且配备了高效的尾气 PM 减排技术。这意味着决策者应严格限制旧车辆许可证的更新,并鼓励使用地铁和公共交通。