Suppr超能文献

探究抗体表面密度和分析物抗原孵育时间这两个主要参数,它们影响非法拉第和扩散受限的电化学生物传感器中的抗体-抗原识别事件。

Probing antibody surface density and analyte antigen incubation time as dominant parameters influencing the antibody-antigen recognition events of a non-faradaic and diffusion-restricted electrochemical immunosensor.

机构信息

The Shraga Segal Department of Microbiology, Immunology and Genetics, Faculty of Health Sciences, Ben-Gurion University of the Negev, 8410501, Beer-Sheva, Israel.

Nanobioelectronics Laboratory (NBEL), Department of Biomedical Engineering and Ilse Katz Institute of Nanoscale Science and Technology, Ben-Gurion University of the Negev, 8410501, Beer-Sheva, Israel.

出版信息

Anal Bioanal Chem. 2020 Mar;412(7):1709-1717. doi: 10.1007/s00216-020-02417-x. Epub 2020 Jan 29.

Abstract

Electrochemical sensors based on antibody-antigen recognition events are commonly used for the rapid, label-free, and sensitive detection of various analytes. However, various parameters at the bioelectronic interface, i.e., before and after the probe (such as an antibody) assembly onto the electrode, have a dominant influence on the underlying detection performance of analytes (such as an antigen). In this work, we thoroughly investigate the dependence of the bioelectronic interface characteristics on parameters that have not been investigated in depth: the antibody density on the electrode's surface and the antigen incubation time. For this important aim, we utilized the sensitive non-faradaic electrochemical impedance spectroscopy method. We showed that as the incubation time of the antigen-containing drop solution increased, a decrease was observed in both the solution resistance and the diffusional resistance with reflecting boundary elements, as well as the capacitive magnitude of a constant phase element, which decreased at a rate of 160 ± 30 kΩ/min, 800 ± 100 mΩ/min, and 520 ± 80 pF × s/min, respectively. Using atomic force microscopy, we also showed that high antibody density led to thicker electrode coating than low antibody density, with root-mean-square roughness values of 2.2 ± 0.2 nm versus 1.28 ± 0.04 nm, respectively. Furthermore, we showed that as the antigen accumulated onto the electrode, the solution resistance increased for high antibody density and decreased for low antibody density. Finally, the antigen detection performance test yielded a better limit of detection for low antibody density than for high antibody density (0.26 μM vs 2.2 μM). Overall, we show here the importance of these two factors and how changing one parameter can drastically affect the desired outcome. Graphical abstract.

摘要

基于抗体-抗原识别事件的电化学传感器通常用于快速、无标记和灵敏地检测各种分析物。然而,生物电子界面上的各种参数,即在探针(如抗体)组装到电极之前和之后,对分析物(如抗原)的基础检测性能有主导影响。在这项工作中,我们彻底研究了生物电子界面特性对以前未深入研究的参数的依赖性:电极表面上的抗体密度和抗原孵育时间。为了实现这一重要目标,我们利用了灵敏的非法拉第电化学阻抗谱方法。我们表明,随着含有抗原的滴液孵育时间的增加,溶液电阻和扩散电阻以及具有反射边界元件的恒相元件的电容幅度都观察到下降,其下降速率分别为 160 ± 30 kΩ/min、800 ± 100 mΩ/min 和 520 ± 80 pF × s/min。通过原子力显微镜,我们还表明,高抗体密度导致比低抗体密度更厚的电极涂层,其均方根粗糙度值分别为 2.2 ± 0.2 nm 和 1.28 ± 0.04 nm。此外,我们表明,随着抗原在电极上积累,高抗体密度下的溶液电阻增加,而低抗体密度下的溶液电阻降低。最后,抗原检测性能测试表明,低抗体密度的检测限比高抗体密度的检测限更好(0.26 μM 对 2.2 μM)。总体而言,我们在这里展示了这两个因素的重要性以及改变一个参数如何会对预期结果产生重大影响。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/7e80/7026205/0e6218b88227/216_2020_2417_Figa_HTML.jpg

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验