Water wettability dependence on surface structure of a snail shell.

There are many reports on the special wettability of hierarchical surface structures in nature. Snail shells with three types of roughness of 10, 100, and 500 µm have a unique wetting behavior. In the present study, we investigate the influence of the surface structure on the water wettability using snail shells with different surface roughness. The wettability of a water droplet on the samples was evaluated. The three types of roughness on the surface structure of snail shell had higher water droplet spreading properties than the two types of roughness 500 µm and, 10 or 100 µm. Surface structures of snail shells with different surface roughness were simulated using epoxy resins to clarify the mechanism for the dynamics wetting behavior. The contact angle with a hydrophobic nature, of the epoxy resin with the three types of roughness decreased with increasing time, indicating a hydrophilic nature. The base diameter of the epoxy resins with the three types of roughness increased with increasing time. This was larger than that for a flat epoxy resin with hydrophilicity. Other epoxy resins with shell texture containing 100 and 500 or 10 and 500 µm roughness showed almost no change in the contact angle and diameter of the droplet base. The three types of roughness on the sample surface contributed to development of the water droplet spreading. The 10 µm roughness of the sample surface influenced the dynamic contact angles.