Suppr超能文献

微通道渐缩对液体石蜡/乙醇同轴流中液滴形成加速作用的实验研究

Experimental Studies of Microchannel Tapering on Droplet Forming Acceleration in Liquid Paraffin/Ethanol Coaxial Flows.

作者信息

Zhang Jinsong, Wang Chao, Liu Xianfeng, Yi Chunming, Wang Z L

机构信息

School of Mechatronic Engineering and Automation, Shanghai University, No.149 Yanchang Road, Shanghai 200072, China.

Shanghai Key Laboratory of Mechanics in Energy Engineering, Shanghai Institute of Applied Mathematics and Mechanics, School of Mechanics and Engineering Science, Shanghai University, Shanghai 200444, China.

出版信息

Materials (Basel). 2020 Feb 20;13(4):944. doi: 10.3390/ma13040944.

Abstract

The formations of micro-droplets are strongly influenced by the local geometries where they are generated. In this paper, through experimental research, we focus on the roles of microchannel tapering in the liquid paraffin/ethanol coaxial flows in their flow patterns, flow regimes, and droplet parameters, i.e., their sizes and forming frequencies. For validity, the non-tapering coaxial flows (the convergence angle α = 0 ∘ ) are investigated, the experimental methods and experimental data are examined and analyzed by contrasting the details with previous works, and consistent results are obtained. We consider a slightly tapering microchannel (the convergence angle α = 2 . 8 ∘ ) and by comparison, the experiments show that the tapering has significant effects on the flow patterns, droplet generation frequencies, and droplet sizes. The regimes of squeezing, dripping, jetting, tubing, and threading are differentiated to shrink toward the coordinate origin of the C a c - W e d space. The closer it is to the origin, the less variations will occur. For the adjacent regimes of the origin, i.e., dripping and squeezing, slight changes have occurred in both flow patterns, as well as the droplet characters. In the dripping and squeezing modes, the liquid droplets are generated near the orifice of the inner tube. Their forming positions (geometry) and flow conditions are almost the same. Therefore, the causes of minute changes in such regimes are physically understandable. While in the jetting regimes, the droplets shrink in size and their forming frequencies increase. The droplet sizes and the frequencies are both linearly related to those of the non-tapering cases with the corresponding relations derived. Furthermore, the threading and the tubing patterns almost did not emerged in the non-tapering data, as it seemed easier to form elongated jets, thinning or widening, in the tapered tubes. This can be explained by the stable analysis of the coaxial jets, which indicates that the reductions in the microchannel diameters can suppress the development of the interface disturbances.

摘要

微滴的形成受到其产生位置处局部几何形状的强烈影响。在本文中,通过实验研究,我们聚焦于微通道渐缩在液体石蜡/乙醇同轴流中的流型、流动状态以及液滴参数(即其尺寸和形成频率)方面所起的作用。为确保有效性,我们研究了非渐缩同轴流(收敛角α = 0°),通过与先前工作的细节进行对比来检验和分析实验方法及实验数据,并获得了一致的结果。我们考虑了一个微通道略有渐缩的情况(收敛角α = 2.8°),通过比较发现,渐缩对流动模式、液滴生成频率和液滴尺寸有显著影响。挤压、滴落、喷射、管束和拉丝等状态向Ca c - Wed空间的坐标原点收缩。离原点越近,变化就越小。对于靠近原点的相邻状态,即滴落和挤压,流动模式以及液滴特性都发生了细微变化。在滴落和挤压模式下,液滴在内管孔口附近产生。它们的形成位置(几何形状)和流动条件几乎相同。因此,这些状态下微小变化的原因在物理上是可以理解的。而在喷射状态下,液滴尺寸缩小且其形成频率增加。液滴尺寸和频率都与非渐缩情况呈线性相关,并得出了相应的关系。此外,在非渐缩数据中几乎没有出现拉丝和管束模式,因为在渐缩管中似乎更容易形成拉长的射流,变细或变宽。这可以通过同轴射流的稳定性分析来解释,这表明微通道直径的减小可以抑制界面扰动的发展。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/bd77/7078719/940b7bbf2bca/materials-13-00944-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验