Suppr超能文献

果汁饮料对两种美学修复材料表面粗糙度的影响。

Effects of fruit drinks on surface roughness of two esthetic restorative materials.

作者信息

Abdelmegid Faika Y, Salama Fouad S, Al-Jameel Mohammad M, Al-Rasheed Talal T, El-Sharawy Mohamed A

机构信息

Department of Pediatric Dentistry and Orthodontic, College of Dentistry, King Saud University, PO Box 60169 Riyadh 11545, Saudi Arabia.

出版信息

Stomatologija. 2019;21(2):47-52.

Abstract

OBJECTIVES

Restorative materials may be exposed in the oral cavity to chemical agents found in beverages, which may lead to their biodegradation. The purpose of this in vitro study was to evaluate the effect of two fruit drinks commonly used by children on surface roughness of two esthetic restorative materials.

MATERIALS AND METHODS

One resin composite (RC), one resin-modified glass ionomer (RMGI) and two fruit drinks (orange and cocktail) were used in this study. Specimens (n=20) of each material were fabricated against Mylar strip. Baseline measurements of surface roughness were recorded for each group using noncontact surface profilometer. Each specimen was placed in the tested fruit drinks for 24 hours and then surface roughness was recorded.

RESULTS

The mean (±SD) surface roughness of RC before and after immersion in orange and cocktail were 0.04±0.02, 0.12±0.05, 0.06±0.03 and 0.11±0.06, respectively and for RMGI were 0.72±0.14, 0.60±0.19, 0.56±0.11, and 0.52±0.15. For RC there was significant difference between surface roughness (Sa) before and after immersion in orange and cocktail (P<0.05). For RMGI, there was significant difference between surface roughness before and after immersion in orange (P<0.05), but no significant difference before and after immersion in cocktail (P>0.05).

CONCLUSIONS

The surface roughness of the RC and RMGI examined showed a significant change in the surface roughness after immersion for 24 hours in the tested fruit drinks.

摘要

目的

修复材料在口腔中可能会接触到饮料中的化学物质,这可能导致其生物降解。本体外研究的目的是评估两种儿童常用果汁饮料对两种美学修复材料表面粗糙度的影响。

材料与方法

本研究使用了一种树脂复合材料(RC)、一种树脂改性玻璃离子水门汀(RMGI)和两种果汁饮料(橙汁和混合果汁)。每种材料制备20个样本,样本紧贴聚酯薄膜条制作。使用非接触式表面轮廓仪记录每组样本表面粗糙度的基线测量值。将每个样本置于测试果汁饮料中24小时,然后记录表面粗糙度。

结果

RC在浸入橙汁和混合果汁前后的平均(±标准差)表面粗糙度分别为0.04±0.02、0.12±0.05、0.06±0.03和0.11±0.06,RMGI的分别为0.72±0.14、0.60±0.19、0.56±0.11和0.52±0.15。对于RC,浸入橙汁和混合果汁前后的表面粗糙度(Sa)存在显著差异(P<0.05)。对于RMGI,浸入橙汁前后的表面粗糙度存在显著差异(P<0.05),但浸入混合果汁前后无显著差异(P>0.05)。

结论

所检测的RC和RMGI在测试果汁饮料中浸泡24小时后,表面粗糙度有显著变化。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验