Time-Resolved Absorptance and Melt Pool Dynamics during Intense Laser Irradiation of a Metal.

High-irradiance lasers incident on metal surfaces create a complex, dynamic process through which the metal can rapidly change from highly reflective to strongly absorbing. Absolute knowledge of this process underpins important industrial laser processes such as laser welding, cutting, and metal additive manufacturing. Determining the time-dependent absorptance of the laser light by a material is important, not only for gaining a fundamental understanding of the light-matter interaction but also for improving process design in manufacturing. Measurements of the dynamic optical absorptance are notoriously difficult due to the rapidly changing nature of the absorbing medium. These data are also of vital importance to process modelers, whose complex simulations need reliable, accurate input data; yet, there are very few available. In this work, we measure the time-dependent, reflected light during a 10-ms laser spot weld using an integrating-sphere apparatus. From this, we calculate the dynamic absorptance for 1070-nm-wavelength light incident on 316L stainless steel. The time resolution of our experiment (less than 1 ) allows the determination of the precise conditions under which several important physical phenomena occur, such as melt and keyhole formation. The average absorptances determined optically are compared with calorimetrically determined values, and it is found that the calorimeter severely underestimates the absorbed energy due to mass lost during the spot weld. Weld-nugget cross sections are also presented to verify our interpretation of the optical results, as well as to provide experimental data for weld-model validation.