Suppr超能文献

穿透性角膜移植术后套管辅助的带凸缘无缝线巩膜固定人工晶状体植入联合硅油注射术

Trocar-assisted, flanged sutureless scleral-fixated intraocular lens implantation combined with silicone oil injection after penetrating keratoplasty surgery.

作者信息

Karadag Remzi, Kilic Guler, Ardagil Aylin, Demirok Ahmet

机构信息

Department of Ophthalmology, Istanbul Medeniyet University School of Medicine, Goztepe, Istanbul, Turkey.

Department of Ophthalmology, Istanbul Medeniyet University Goztepe Research and Training Hospital, Goztepe, Istanbul, Turkey.

出版信息

GMS Ophthalmol Cases. 2020 Feb 14;10:Doc03. doi: 10.3205/oc000130. eCollection 2020.

Abstract

We describe a combined technique of trocar-assisted sutureless scleral-fixated intraocular lens implantation and silicone oil injection at the same session. Two 3 mm scleral tunnels were created 2 mm away from and parallel to the limbus with the 23-gauge vitrectomy trocars entering the sclera transconjunctivally at an angle of approximately 10° at the 3 o'clock and 9 o'clock meridians. After the 3-piece foldable IOL was delivered to the anterior chamber through the corneal incision, the tip of one of the IOL haptics was grasped with a 23-gauge serrated retinal forceps entered through the trocar located at the 3 o'clock meridian. Then the haptic was removed from the scleral tunnel together with the trocar out of the globe. The same procedure was applied to the other haptic. A transconjunctival secure 10-0 nylon suture was placed at the scleral tunnel entry site around the haptic. The ends of the haptics were cauterized to make a flange. The resultant flanges of the haptics were pushed back and fixed into the scleral tunnels. Perfluorooctane was taken out of the eye with vitreoretinal surgery and the silicone was injected into the eye to prevent hypotonia. No complications were seen intraoperatively or postoperatively. After 1-month follow-up period, IOL was seen stabilized.

摘要

我们描述了一种在同一次手术中联合使用套管针辅助无缝线巩膜固定人工晶状体植入术和硅油注射术的技术。在距角膜缘2mm处并与之平行制作两条3mm的巩膜隧道,23G玻璃体切割套管针经结膜以约10°角在3点和9点子午线处经巩膜进入。将三片折叠式人工晶状体通过角膜切口送入前房后,用经位于3点子午线处套管针进入的23G锯齿状视网膜镊抓住人工晶状体一个襻的尖端。然后将襻与套管针一起从巩膜隧道中取出眼球。对另一个襻进行相同操作。在襻周围的巩膜隧道入口处放置一根经结膜固定的10-0尼龙缝线。襻的末端烧灼形成一个凸缘。将襻形成的凸缘向后推并固定到巩膜隧道中。用玻璃体视网膜手术将全氟辛烷从眼内取出,然后向眼内注入硅油以防止低眼压。术中及术后均未发现并发症。随访1个月后,可见人工晶状体位置稳定。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/7621/7047885/d743480c672c/OC-10-03-g-001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验