Smith B A, Sefton M V
Department of Chemical Engineering and Applied Chemistry, University of Toronto, Ontario, Canada.
J Biomed Mater Res. 1988 Aug;22(8):673-85. doi: 10.1002/jbm.820220802.
The diffusivities of thrombin and antithrombin III in a heparin-polyvinyl alcohol hydrogel were estimated and used to demonstrate that diffusion limits the effectiveness of the immobilized heparin in the interior of such hydrogels. Diffusivities were calculated from permeabilities and partition coefficients measured with films in a diffusion chamber apparatus. The diffusion coefficients were estimated to be 6 +/- 4 X 10(-8) cm2/s for thrombin and 4 +/- 2 X 10(-8) cm2/s for antithrombin III in 10% gel membranes with or without immobilized heparin. Using the diffusivity of thrombin and a Thiele-type modulus, the effectiveness factor of a spherical heparin-PVA bead used to accelerate the inactivation of thrombin by antithrombin III was found to be 4-9% (diameter range 250-150 micron). While indicating that diffusion of thrombin limited the full utilization of the immobilized heparin, these values for the effectiveness factor could not completely account for the low apparent heparin activity (0.2%) in a thrombin time test of heparin-PVA "beads" (J. Biomed. Mater. Res., 17, 359 (1983]. Other factors such as the immobilization chemistry or the diffusion of thrombin-antithrombin III complex must be considered for a full explanation of the thrombin time results.
估算了凝血酶和抗凝血酶III在肝素-聚乙烯醇水凝胶中的扩散系数,并以此证明扩散作用限制了此类水凝胶内部固定化肝素的有效性。扩散系数是根据在扩散室装置中用薄膜测得的渗透率和分配系数计算得出的。在含有或不含固定化肝素的10%凝胶膜中,凝血酶的扩散系数估计为6±4×10⁻⁸平方厘米/秒,抗凝血酶III的扩散系数估计为4±2×10⁻⁸平方厘米/秒。利用凝血酶的扩散系数和蒂勒型模量,发现用于加速抗凝血酶III使凝血酶失活的球形肝素-PVA珠的有效因子为4-9%(直径范围250-150微米)。虽然表明凝血酶的扩散限制了固定化肝素的充分利用,但这些有效因子的值并不能完全解释肝素-PVA“珠”的凝血酶时间测试中低表观肝素活性(0.2%)的原因[《生物医学材料研究杂志》,17,359(1983年)]。为了全面解释凝血酶时间结果,必须考虑其他因素,如固定化化学或凝血酶-抗凝血酶III复合物的扩散。