Abdullah Monis Abdulmanan, Albarody Thar Mohammed Badri, Hussein Alaa Raad
Mechanical Engineering Department, Universiti Teknologi Petronas, Seri Iskandar 32610, Perak, Malaysia.
Nanotechnology. 2020 Apr 24;31(28):285709. doi: 10.1088/1361-6528/ab8040. Epub 2020 Mar 16.
Precision temperature measurement of a nano system with high sensitivity and fast response is still a challenge. The marvelous thermal and mechanical properties of graphite will allow the creation of superior nanoscale temperature sensors. In-situ x-ray diffraction was employed to determine the graphite hexagonal crystal lattice dimensions and the coefficient of thermal expansion based on the calculation of its interatomic distance. The energy of graphite was mapped over the first Brillouin zone in the temperature range of 50 °C-1200 °C at intervals of 50 °C. Energy-based comparative studies between the quantum free electron approach obtained by an inelastic scattering and an harmonic oscillator are introduced by the principal quantum number associated with the excitation level. The hexagonal lattice constants, interlayer distance and interatomic distance of graphite crystals are investigated analytically with consideration given to their temperature dependence and the carbon peak (002), where the 2θ value decreases slightly with increasing temperature. The coefficient of thermal expansion of graphite-based interatomic distance is negative and tends toward zero with increasing temperature, which is in very good agreement with experiments. Moreover, the energy probability distributions enclosed by reciprocal lattice vectors of the hexagonal lattice are defined and interpreted based on lattice dimensions with varying temperature. Linear changes of the temperature-driven unit cell lattice dimensions and analysis of the kinetic energy of the electron in graphite may both be utilised for the advanced temperature interpretation model and preliminary design of a precise nanothermometer.
对纳米系统进行高精度、高灵敏度且快速响应的温度测量仍然是一项挑战。石墨出色的热学和力学性能将有助于制造出更优异的纳米级温度传感器。采用原位X射线衍射来确定石墨六方晶格尺寸以及基于其原子间距离计算得出的热膨胀系数。在50℃至1200℃的温度范围内,每隔50℃绘制一次石墨在第一布里渊区的能量分布图。通过与激发能级相关的主量子数,介绍了非弹性散射得到的量子自由电子方法与简谐振子之间基于能量的对比研究。考虑到石墨晶体的温度依赖性以及碳峰(002)(其中2θ值随温度升高略有下降),对石墨晶体的六方晶格常数、层间距和原子间距离进行了分析研究。基于原子间距离的石墨热膨胀系数为负,且随温度升高趋于零,这与实验结果非常吻合。此外,基于不同温度下的晶格尺寸,定义并解释了六方晶格倒易晶格矢量所包围的能量概率分布。温度驱动的晶胞晶格尺寸的线性变化以及石墨中电子动能的分析,均可用于先进的温度解释模型和精密纳米温度计的初步设计。