Shekhar Anshu, Chandra Krishna Ch, Patil Shantanu, Tapasvi Sachin
The Orthopaedic Speciality Clinic, 16 Status Chambers, 1221/A Wrangler Paranjpe Road, Off F.C. Road, Pune, 411004, India.
Department of Translational Medicine & Research, SRM Medical College and Hospitals, SRM Institute of Science & Technology, Kattankulathur, Tamil Nadu, 603203, India.
J Clin Orthop Trauma. 2020 Mar;11(Suppl 2):S223-S227. doi: 10.1016/j.jcot.2019.03.006. Epub 2019 Mar 16.
Total knee arthroplasty (TKA) is currently the best option for management of advanced knee arthritis for patients who have exhausted conservative management. There have been significant implant design improvements and this is a continuing process to help the surgeon replicate patient anatomy and kinematics. Amongst the many variables in implantation to achieve a well-functioning TKA, getting optimal femoral component sizing is one. Every implant system has certain discreet implant sizes and the surgeon has to strive to obtain the best fit possible for the patient and attain a well aligned and stable TKA. The aim of this study was to assess the frequency of various femoral component sizes being implanted with a system which has 2.5 mm antero-posterior increment between sizes, and to assess the incidence of anterior femoral notching when using a posterior referencing system.
A retrospective analysis of 739 TKAs implanted in 532 patients between January 2013 and January 2016 at a single center using a single posterior stabilized implant system was done. Patient demographics and femur component size used was obtained from hospital patient records. Immediate post-operative radiographs were analyzed to look for anterior femoral notching and presence of this was classified according to Tayside classification. A telephonic follow up at minimum 2 tears post-surgery was done to interview for occurrence of supracondylar femur fracture or revision for any other causes.
There were 207 bilateral and 325 unilateral TKAs performed in 532 patients during the study period. There were 245 males and 287 females with an average age of 61.3 years (43-81 years, SD = 7.2). The most commonly used femoral component was 60 mm and an intermediate size prosthesis was used in 43.11% patients. The incidence of femoral notching ranged from 0 to 6.3%. No patient had sustained a supracondylar condylar fracture at minimum 2 years follow up.
The availability of a larger number of femoral components in a TKA system allows the surgeon the modularity to choose and obtain the best fit possible. Restoration of posterior condylar offset, preventing anterior notching, medio-lateral overhang and patellofemoral joint stuffing are greatly dependent on correct femoral component sizing. The findings from our study underscore the need to use an implant system with as many femoral size options as possible with lesser increments in between sizes to minimize anterior femoral notching when using a posterior referencing technique.
对于保守治疗无效的晚期膝关节炎患者,全膝关节置换术(TKA)是目前最佳的治疗选择。植入物设计有了显著改进,且这一过程仍在持续,以帮助外科医生复制患者的解剖结构和运动学。在实现功能良好的TKA植入的众多变量中,获得最佳的股骨组件尺寸是其中之一。每个植入系统都有特定的离散植入尺寸,外科医生必须努力为患者获得最佳匹配,以实现排列良好且稳定的TKA。本研究的目的是评估使用尺寸间前后增量为2.5毫米的系统植入各种股骨组件尺寸的频率,并评估使用后参考系统时股骨前部切迹的发生率。
对2013年1月至2016年1月在单一中心为532例患者植入的739例TKA进行回顾性分析,使用单一的后稳定植入系统。患者人口统计学资料和所使用的股骨组件尺寸从医院患者记录中获取。分析术后即刻的X线片以寻找股骨前部切迹,并根据泰赛德分类法对其存在情况进行分类。术后至少随访2年,通过电话随访询问髁上股骨骨折的发生情况或因任何其他原因进行翻修的情况。
在研究期间,532例患者中进行了207例双侧TKA和325例单侧TKA。有245例男性和287例女性,平均年龄为61.3岁(43 - 81岁•标准差=7.2)。最常用的股骨组件是60毫米,43.11%的患者使用中等尺寸的假体。股骨切迹的发生率在0至6.3%之间。在至少2年的随访中,没有患者发生髁上髁间骨折。
TKA系统中提供更多数量的股骨组件,使外科医生能够灵活选择并获得最佳匹配。恢复后髁偏移、防止前部切迹、内外侧悬垂和髌股关节填充很大程度上取决于正确的股骨组件尺寸。我们的研究结果强调,在使用后参考技术时,需要使用具有尽可能多股骨尺寸选项且尺寸间增量较小的植入系统,以尽量减少股骨前部切迹。