Suppr超能文献

开发一种标准化的新型香烟烟雾生成(SNCSG)系统,用于评估新型香烟类型(加热不燃烧(HNB)烟草和电子烟(E-Cigs))烟雾中的化学物质。

Development of a standardized new cigarette smoke generating (SNCSG) system for the assessment of chemicals in the smoke of new cigarette types (heat-not-burn (HNB) tobacco and electronic cigarettes (E-Cigs)).

机构信息

Jeonbuk Department of Inhalation Research, Korea Institute of Toxicology, Jeongeup, 56212, Republic of Korea; Human and Environmental Toxicology, University of Science and Technology, Daejeon, 34113, Republic of Korea.

Department of Toxicology Evaluation, Konyang University, Daejeon, 35365, Republic of Korea.

出版信息

Environ Res. 2020 Jun;185:109413. doi: 10.1016/j.envres.2020.109413. Epub 2020 Mar 20.

Abstract

To systematically regulate new types of cigarettes for which their safety has yet to be verified, such as heat-not-burn (HNB) products and electronic cigarettes (E-Cigs), the identification of chemicals in the new cigarette smoke is necessary. However, this is challenging due to the large number of new cigarette types and their different vaporization approaches. To address this issue, we herein report the development of a standardized new cigarette smoke generating (SNCSG) system based on heating-temperature control, which is able to generate smoke for all types of new cigarettes. Validation of the developed system was also carried out through analysis of the carbonyl compounds (e.g., formaldehyde and acetaldehyde) in the new cigarette smoke of HNB products and E-Cigs generated by the SNCSG system under different heating temperatures. The analytical results were used to validate the SNCSG system by comparison with those of previous studies. In all new cigarette smoke samples, the formaldehyde and acetaldehyde concentrations increased dramatically upon increasing the heating temperatures, especially over the reference heating range of each HNB device (mean concentration (μg/cigarette, n = 5 (HNB and E-Cig samples)): formaldehyde = 0.373-5.841 (250-320 °C), and acetaldehyde = 0.088-27.60 (250-320 °C). In the case of the HNB samples, the concentration differences determined by the heating temperatures of the tobacco stick were statistically significant, with p-values (ANOVA) of 1.85E-10 (formaldehyde) and 1.73E-08 (acetaldehyde). In the majority of smoke samples, acrolein and propionaldehyde were detected under relatively high heating temperature conditions (>250 °C) at 0.50 ± 1.76 μg/(cigarette or 10 μL), while acetone was detected under low heating temperature conditions (<250 °C) at 0.09 ± 0.17 μg/(cigarette or 10 μL). These results indicate that the developed SNCSG system could be suitable for application in the regulation of new types of cigarettes, regardless of the cigarette type and heating approach.

摘要

为了对尚未验证安全性的新型香烟(如加热不燃烧产品和电子烟)进行系统监管,有必要对新香烟烟雾中的化学物质进行鉴定。然而,由于新型香烟的种类繁多,且其蒸发方式不同,这一任务极具挑战性。为了解决这一问题,我们在此报告了一种基于加热温度控制的标准化新型香烟烟雾生成(SNCSG)系统的开发,该系统能够为所有类型的新型香烟生成烟雾。我们还通过分析 SNCSG 系统在不同加热温度下生成的 HNB 产品和电子烟的新香烟烟雾中的羰基化合物(如甲醛和乙醛),对所开发系统进行了验证。通过与之前的研究结果进行比较,用分析结果对 SNCSG 系统进行了验证。在所有新型香烟烟雾样本中,随着加热温度的升高,甲醛和乙醛的浓度均显著增加,尤其是在每个 HNB 装置的参考加热范围内(平均浓度(μg/支香烟,n=5(HNB 和电子烟样本)):甲醛=0.373-5.841(250-320°C),乙醛=0.088-27.60(250-320°C)。在 HNB 样本中,通过烟棒加热温度确定的浓度差异具有统计学意义,p 值(ANOVA)分别为 1.85E-10(甲醛)和 1.73E-08(乙醛)。在大多数烟雾样本中,丙烯醛和丙醛在相对较高的加热温度条件下(>250°C)以 0.50±1.76μg/(支或 10μL)检测到,而丙酮在较低的加热温度条件下(<250°C)以 0.09±0.17μg/(支或 10μL)检测到。这些结果表明,所开发的 SNCSG 系统可适用于新型香烟的监管,无论香烟类型和加热方式如何。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验