Suppr超能文献

用于测量动态运动中膝关节角度的设备的验证。

Validation of a Device to Measure Knee Joint Angles for a Dynamic Movement.

机构信息

Department of Mechanical Engineering, College of Engineering and Computer Science, University of Michigan-Dearborn, Dearborn, MI 48128, USA.

出版信息

Sensors (Basel). 2020 Mar 21;20(6):1747. doi: 10.3390/s20061747.

Abstract

Participation in sports has risen in the United States over the last few years, increasing the risk of injuries such as tears to the anterior cruciate ligament (ACL) in the knee. Previous studies have shown a correlation between knee kinematics when landing from a jump and this injury. The purpose of this study was to validate the ability of a commercially available inertial measurement units (IMUs) to accurately measure knee joint angles during a dynamic movement. Eight healthy subjects participated in the study. Validation was performed by comparing the angles measured by the wearable device to those obtained through the gold standard motion capture system when landing from a jump. Root mean square, linear regression analysis, and Bland-Altman plots were performed/constructed. The mean difference between the wearable device and the motion capture data was 8.4° (flexion/extension), 4.9° (ab/adduction), and 3.9° (rotation). In addition, the device was more accurate at smaller knee angles. In our study, a commercially available wearable IMU was able to perform fairly well under certain conditions and was less accurate in other conditions.

摘要

近年来,美国参与体育运动的人数有所增加,这增加了膝盖前交叉韧带(ACL)撕裂等受伤的风险。之前的研究表明,从跳跃中落地时的膝关节运动学与这种损伤之间存在相关性。这项研究的目的是验证市售惯性测量单元(IMU)在动态运动中准确测量膝关节角度的能力。八名健康受试者参与了这项研究。通过将可穿戴设备测量的角度与从跳跃中落地时通过黄金标准运动捕捉系统获得的角度进行比较来进行验证。进行了均方根、线性回归分析和 Bland-Altman 图的构建。可穿戴设备和运动捕捉数据之间的平均差异为 8.4°(屈伸)、4.9°(内外展)和 3.9°(旋转)。此外,该设备在较小的膝关节角度下更准确。在我们的研究中,市售的可穿戴式 IMU 在某些情况下表现相当不错,但在其他情况下准确性较差。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/b78b/7147162/68956ed80819/sensors-20-01747-g001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验