Suppr超能文献

一种用于高速帧超声心动图的新型 2D 斑点追踪方法。

A Novel 2-D Speckle Tracking Method for High-Frame-Rate Echocardiography.

出版信息

IEEE Trans Ultrason Ferroelectr Freq Control. 2020 Sep;67(9):1764-1775. doi: 10.1109/TUFFC.2020.2985451. Epub 2020 Apr 3.

Abstract

Speckle tracking echocardiography (STE) is a clinical tool to noninvasively assess regional myocardial function through the quantification of regional motion and deformation. Even if the time resolution of STE can be improved by high-frame-rate (HFR) imaging, dedicated HFR STE algorithms have to be developed to detect very small interframe motions. Therefore, in this article, we propose a novel 2-D STE method, purposely developed for HFR echocardiography. The 2-D motion estimator consists of a two-step algorithm based on the 1-D cross correlations to separately estimate the axial and lateral displacements. The method was first optimized and validated on simulated data giving an accuracy of ~3.3% and ~10.5% for the axial and lateral estimates, respectively. Then, it was preliminarily tested in vivo on ten healthy volunteers showing its clinical applicability and feasibility. Moreover, the extracted clinical markers were in the same range as those reported in the literature. Also, the estimated peak global longitudinal strain was compared with that measured with a clinical scanner showing good correlation and negligible differences (-20.94% versus -20.31%, p -value = 0.44). In conclusion, a novel algorithm for STE was developed: the radio frequency (RF) signals were preferred for the axial motion estimation, while envelope data were preferred for the lateral motion. Furthermore, using 2-D kernels, even for 1-D cross correlation, makes the method less sensitive to noise.

摘要

斑点追踪超声心动图(STE)是一种通过量化局部运动和变形来非侵入性地评估局部心肌功能的临床工具。即使 STE 的时间分辨率可以通过高帧率(HFR)成像来提高,也必须开发专门的 HFR STE 算法来检测非常小的帧间运动。因此,在本文中,我们提出了一种新颖的 2-D STE 方法,专门为 HFR 超声心动图开发。2-D 运动估计器由基于 1-D 互相关的两步算法组成,分别估计轴向和横向位移。该方法首先在模拟数据上进行了优化和验证,轴向和横向估计的精度分别约为 3.3%和 10.5%。然后,在十名健康志愿者体内进行了初步测试,显示出其临床适用性和可行性。此外,提取的临床标志物与文献报道的范围相似。此外,估计的全局纵向应变峰值与临床扫描仪测量的结果进行了比较,相关性良好,差异可忽略不计(-20.94%与-20.31%,p 值=0.44)。总之,开发了一种用于 STE 的新算法:射频(RF)信号优先用于轴向运动估计,而包络数据优先用于横向运动估计。此外,使用 2-D 核,即使对于 1-D 互相关,也可以使方法对噪声的敏感性降低。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验