Della-Flora Alexandre, Wilde Marcelo L, Thue Pascal S, Lima Diana, Lima Eder C, Sirtori Carla
Instituto de Química, Universidade Federal do Rio Grande do Sul, Av. Bento Gonçalves 9500, CEP 91501-970, Porto Alegre, RS, Brazil.
Instituto de Química, Universidade Federal do Rio Grande do Sul, Av. Bento Gonçalves 9500, CEP 91501-970, Porto Alegre, RS, Brazil.
J Hazard Mater. 2020 Sep 5;396:122699. doi: 10.1016/j.jhazmat.2020.122699. Epub 2020 Apr 14.
The anti-cancer drug Flutamide (FLUT) is widely used and is of great environmental concern. The solar photo-Fenton (SPF) process can be an effective treatment for the removal of this type of micropollutant. The use of a single addition of 5 mg L of Fe and 50 mg L of HO achieved 20% primary degradation and only 3.05% mineralization. By using three additions of 5 mg L Fe, with an initial HO concentration of 150 mg L, 58% primary degradation was achieved, together with 12.07% mineralization. Consequently, thirteen transformation products (TPs) were formed. The SPF process was further combined with adsorption onto avocado seed activated carbon (ASAC) as an environmentally friendly approach for the removal of remained FLUT and the TPs. Doehlert design was used to assess the behavior of 13 TPs by optimizing the contact time and the adsorbent mass load. The optimal conditions for removal of FLUT and the TPs were 14 mg of ASAC and a contact time of 40 min. Remained FLUT and the TPs were totally removed using the adsorption process. The mechanisms of adsorption of FLUT and the TPs were strongly influenced by their polarity and π-π interactions of the TPs onto ASAC.
抗癌药物氟他胺(FLUT)被广泛使用,并且备受环境关注。太阳能光芬顿(SPF)工艺可能是去除这类微污染物的有效处理方法。单次添加5 mg/L的铁和50 mg/L的过氧化氢实现了20%的初级降解,矿化率仅为3.05%。通过三次添加5 mg/L的铁,初始过氧化氢浓度为150 mg/L,实现了58%的初级降解以及12.07%的矿化。因此,形成了13种转化产物(TPs)。SPF工艺进一步与吸附到鳄梨籽活性炭(ASAC)上相结合,作为一种去除残留FLUT和TPs的环保方法。采用Doehlert设计通过优化接触时间和吸附剂质量负载来评估13种TPs的行为。去除FLUT和TPs的最佳条件是14 mg的ASAC和40分钟的接触时间。通过吸附过程,残留的FLUT和TPs被完全去除。FLUT和TPs的吸附机制受到它们的极性以及TPs与ASAC之间的π-π相互作用的强烈影响。