Institute of General Practice and Health Services Research, Technical University of Munich School of Medicine, Munich, Germany,
Institute of General Practice and Health Services Research, Technical University of Munich School of Medicine, Munich, Germany.
Respiration. 2020;99(5):389-397. doi: 10.1159/000507098. Epub 2020 May 5.
Capnovolumetry is of interest as a method for the diagnosis of obstructive airway diseases, requiring little cooperation from the patient.
To help in the interpretation of capnovolumetric parameters, we aimed to identify their correspondence to conventional lung function indices.
We studied 978 patients from a diagnostic study with complete functional data and the clinical diagnosis of asthma, chronic obstructive pulmonary disease (COPD), or no respiratory disease. Using path analysis, four capnovolumetric parameters (slope of expiratory phase 3, ratio of slopes of phases 3 and 2, volume of phase 2, and the ratio area/volume of phase 3) previously identified as predictors of airway obstruction in terms of spirometry and body ple-thysmography, were analyzed regarding their relationship to each other and the diagnostic categories of asthma or COPD versus control, or obstruction versus no obstruction. We then identified four lung function parameters showing relationships as much as possible isomorphic to those between capnovolumetric parameters.
The four capnovolumetric parameters were related to COPD and obstruction via both direct and indirect influences, but only two of them to asthma. Regarding the correspondence to lung function parameters, the slope of expiratory phase 3 corresponded best to the ratio of residual volume to total lung capacity, the ratio of slopes of phases 3 and 2 to forced expiratory volume in 1 s, the volume of phase 2 to forced expired flow at 50% of vital capacity, and the ratio area/volume of phase 3 to forced vital capacity.
Our results indicated an intricate relationship of capnovolumetric parameters to each other and to airway obstruction, asthma, or COPD. The correspondence to conventional lung function measures seemed to reflect the entities lung hyperinflation, overall ventilatory impairment, bronchoconstriction, and ventilated lung volume, in that order. These findings might be helpful for clinicians in the interpretation of capnovolumetry.
作为一种诊断阻塞性气道疾病的方法,呼出气量容积法具有不需要患者太多配合的优点。
为了帮助解释呼出气量容积法的参数,我们旨在确定这些参数与传统肺功能指标的对应关系。
我们研究了来自一项诊断研究的 978 例患者,这些患者均具有完整的功能数据和哮喘、慢性阻塞性肺疾病(COPD)或无呼吸系统疾病的临床诊断。通过路径分析,我们分析了以前确定的与肺功能检查和体描法测定的气道阻塞相关的 4 个呼出气量容积法参数(呼气相 3 的斜率、相 3 和相 2 的斜率比、相 2 的容积和相 3 的面积/容积比),以了解它们之间的相互关系以及哮喘或 COPD 与对照组或阻塞与非阻塞之间的诊断类别。然后,我们确定了 4 个肺功能参数,这些参数尽可能与呼出气量容积法参数之间具有同构关系。
这 4 个呼出气量容积法参数通过直接和间接影响与 COPD 和阻塞相关,但仅与其中两个参数与哮喘相关。关于与肺功能参数的对应关系,呼气相 3 的斜率与残气量/肺总量比最匹配,相 3 和相 2 的斜率比与 1 秒用力呼气量(FEV1)最匹配,相 2 的容积与 50%肺活量时的用力呼出流量(FEF50)最匹配,相 3 的面积/容积比与用力肺活量(FVC)最匹配。
我们的结果表明呼出气量容积法参数之间以及与气道阻塞、哮喘或 COPD 之间存在复杂的关系。与传统肺功能测量的对应关系似乎反映了肺过度充气、整体通气障碍、支气管收缩和通气肺容积等实体,依次为。这些发现可能有助于临床医生解释呼出气量容积法。