Odhiambo Vincent Otieno, Ongarbayeva Aizat, Kéri Orsolya, Simon László, Szilágyi Imre Miklós
Department of Inorganic and Analytical Chemistry, Budapest University of Technology and Economics, H-1111 Budapest, Szent Gellért tér 4., Hungary.
Department of Organic Chemistry and Technology, Budapest University of Technology and Economics, H-1111 Budapest, Budafoki út 8., Hungary.
Nanomaterials (Basel). 2020 May 2;10(5):882. doi: 10.3390/nano10050882.
TiO/WO nanofibers were prepared in a one-step process by electrospinning. Titanium(IV) bis(ammonium lactato)dihydroxide (TiBALDH) and ammonium metatungstate (AMT) were used as water-soluble Ti and W precursors, respectively. Polyvinylpyrrolidone (PVP) and varying ratios of TiBALDH and AMT were dissolved in a mixture of HO, EtOH and CHCOOH. The as-spun fibers were then heated in air at 1 °C min until 600 °C to form TiO/WO composite nanofibers. Fiber characterization was done using TG/DTA, SEM-EDX, FTIR, XRD, and Raman. The annealed composite nanofibers had a diameter range of 130-1940 nm, and the results showed a growth in the fiber diameter with an increasing amount of WO. The photocatalytic property of the fibers was also checked for methyl orange bleaching in visible and UV light. In visible light, the photocatalytic activity increased with an increase in the ratio of AMT, while 50% TiBALDH composite fibers showed the highest activity among the as-prepared fibers in UV light.
通过静电纺丝一步法制备了TiO/WO纳米纤维。分别使用二羟基双(乳酸铵)钛(IV)(TiBALDH)和偏钨酸铵(AMT)作为水溶性Ti和W前驱体。将聚乙烯吡咯烷酮(PVP)以及不同比例的TiBALDH和AMT溶解在水、乙醇和乙酸的混合溶液中。然后将初纺纤维在空气中以1℃/分钟的速度加热至600℃,以形成TiO/WO复合纳米纤维。使用热重/差示热分析(TG/DTA)、扫描电子显微镜-能谱分析(SEM-EDX)、傅里叶变换红外光谱(FTIR)、X射线衍射(XRD)和拉曼光谱对纤维进行表征。退火后的复合纳米纤维直径范围为130-1940纳米,结果表明随着WO含量的增加,纤维直径增大。还检测了纤维在可见光和紫外光下对甲基橙漂白的光催化性能。在可见光下,光催化活性随着AMT比例的增加而提高,而50%TiBALDH复合纤维在紫外光下表现出所制备纤维中最高的活性。