Department of Neurosurgery, Amsterdam University Medical Centers, Academic Medical Center (AMC), Amsterdam, The Netherlands.
Oper Neurosurg (Hagerstown). 2020 Sep 1;19(3):E224-E229. doi: 10.1093/ons/opaa110.
Intraoperative cone-beam computed tomography (iCBCT) allows for rapid 3-dimensional imaging. However, it is currently unknown whether this imaging technique offers sufficient accuracy for stereotactic registration during deep brain stimulation (DBS) procedures.
To determine the accuracy of iCBCT, with the O-arm O2 (Medtronic), for stereotactic registration by comparing this modality to stereotactic magnetic resonance imaging (MRI).
All DBS patients underwent a preoperative non-stereotactic 3 Tesla MRI, stereotactic 1.5 Tesla MRI, stereotactic O-arm iCBCT, postimplantation O-arm iCBCT, and postoperative conventional multidetector computed tomography (CT) scan. We compared stereotactic (X, Y, and Z) coordinates of the anterior commissure (AC), the posterior commissure (PC), and midline reference (MR) between stereotactic MRI and iCBCT. For localisation comparison of electrode contacts, stereotactic coordinates of electrode tips were compared between the postoperative multidetector CT and iCBCT.
A total of 20 patients were evaluated. The average absolute difference in stereotactic coordinates of AC, PC, and MR was 0.4 ± 0.4 mm for X, 0.4 ± 0.4 mm for Y, and 0.7 ± 0.5 mm for Z. The average absolute difference in X-, Y-, and Z-coordinates for electrode localisation (N = 34) was 0.3 ± 0.3 mm, 0.6 ± 0.3 mm, and 0.6 ± 0.6 mm. These differences were small enough not to be considered clinically relevant.
Stereotactic MRI and O-arm iCBCT yield comparable coordinates in pre- and postoperative imaging. Differences found are below the threshold of clinical relevance. Intraoperative O-arm CBCT offers rapid stereotactic registration and evaluation of electrode placement. This increases patient comfort and neurosurgical workflow efficiency.
术中锥形束计算机断层扫描(iCBCT)可实现快速的三维成像。然而,目前尚不清楚该成像技术在深部脑刺激(DBS)手术中进行立体定向注册时是否具有足够的准确性。
通过与立体定向磁共振成像(MRI)比较,确定 O 臂 O2(美敦力)iCBCT 用于立体定向注册的准确性。
所有 DBS 患者均接受术前非立体定向 3T MRI、立体定向 1.5T MRI、立体定向 O 臂 iCBCT、植入后 O 臂 iCBCT 和术后常规多层 CT(CT)扫描。我们比较了立体定向(X、Y 和 Z)前连合(AC)、后连合(PC)和中线参考(MR)的坐标在立体定向 MRI 和 iCBCT 之间。为了比较电极触点的定位,我们比较了术后多层 CT 和 iCBCT 之间电极尖端的立体定向坐标。
共评估了 20 例患者。AC、PC 和 MR 的立体定向坐标的平均绝对差异为 X 方向为 0.4±0.4mm,Y 方向为 0.4±0.4mm,Z 方向为 0.7±0.5mm。电极定位(N=34)的 X、Y 和 Z 坐标的平均绝对差异为 0.3±0.3mm、0.6±0.3mm 和 0.6±0.6mm。这些差异小到不足以被认为具有临床意义。
立体定向 MRI 和 O 臂 iCBCT 在术前和术后成像中产生可比的坐标。发现的差异低于临床相关阈值。术中 O 臂 CBCT 提供了快速的立体定向注册和电极放置评估。这增加了患者的舒适度和神经外科工作流程效率。