Associate Professor of Radiology Department of Oral Biology & Diagnostic Sciences, The Dental College of Georgia at Augusta University, Augusta, GA, USA.
Third-Year Dental Student, The Dental College of Georgia at Augusta University, Augusta, GA, USA.
Oral Surg Oral Med Oral Pathol Oral Radiol. 2020 Sep;130(3):313-321. doi: 10.1016/j.oooo.2020.03.043. Epub 2020 May 17.
The aim of this study was to evaluate inherent image quality and the effects of software changes on image quality by using photostimulable phosphor (PSP) plates.
Six new DIGORA Optime PSP plates (Soredex/Orion Corp., Helsinki, Finland) were used to assess inherent image quality and the effect of software settings on image quality. Images of a radiographic phantom were exposed to evaluate dynamic range, spatial resolution, and contrast resolution. Varying sharpness filters and gamma values were adjusted to assess their effects on these parameters.
Dynamic range was not affected by software settings. Spatial resolution varied among the raw (i.e., minimally processed) images and increased maximally with application of a sharpness filter of 30. Contrast resolution varied among the plates for the raw images. The gamma value of 0.8 was most consistent at increasing the detection of contrast wells.
The findings of our study suggest that the sharpness filter 30 and gamma value of 0.8 may increase the spatial and contrast resolutions of DIGORA Optime PSP images when applied during the scanning process. However, this increase was small. Our results also establish that software manipulation should not be used in an attempt to compensate for data that are not present in the image.
本研究旨在通过使用光激励磷光(PSP)板来评估固有图像质量以及软件变化对图像质量的影响。
使用六张新的 DIGORA Optime PSP 板(Soredex/Orion Corp.,赫尔辛基,芬兰)来评估固有图像质量以及软件设置对图像质量的影响。使用射线照相体模对图像进行曝光,以评估动态范围、空间分辨率和对比分辨率。调整不同的锐度滤波器和伽马值,以评估它们对这些参数的影响。
软件设置不影响动态范围。原始图像(即最小处理)的空间分辨率存在差异,应用锐度滤波器 30 时最大。原始图像的对比度分辨率在各板之间存在差异。伽马值为 0.8 时,在提高对比度井的检测方面最为一致。
我们的研究结果表明,在扫描过程中应用锐度滤波器 30 和伽马值 0.8 可以提高 DIGORA Optime PSP 图像的空间和对比度分辨率。然而,这种提高幅度很小。我们的结果还表明,不应使用软件处理来试图补偿图像中不存在的数据。