Suppr超能文献

水活度对奶粉中沙门氏菌热失活动力学的影响。

Effect of water activity on the thermal inactivation kinetics of Salmonella in milk powders.

机构信息

Department of Food Science and Technology, University of Nebraska, Lincoln 68588.

Department of Food Science and Technology, University of Nebraska, Lincoln 68588; Department of Biological Systems Engineering, University of Nebraska-Lincoln, Lincoln 68583.

出版信息

J Dairy Sci. 2020 Aug;103(8):6904-6917. doi: 10.3168/jds.2020-18298. Epub 2020 May 29.

Abstract

Persistence of Salmonella in milk powders has caused several foodborne outbreaks. The determination of proper pasteurization processing conditions requires an understanding of the thermal inactivation kinetics of Salmonella in milk powders. However, there is a lack of knowledge related to the effects of water activity (a) and fat content on Salmonella inactivation in milk powder during thermal processing. Two types of milk powders, nonfat dry milk and whole milk powder, with different fat contents (0.62 and 29.46% wt/wt, respectively) were inoculated with a 5-strain cocktail of Salmonella and equilibrated to 3 a levels (0.10, 0.20, and 0.30) for isothermal treatments at 75, 80, and 85°C to obtain D-values (the time required to achieve a 10-fold reduction of the bacteria at the isothermal treatment temperature) and z-values (the increase in temperature required to achieve a 90% reduction of the decimal reduction time D). Stability tests showed that the inoculation method used in this study provided a high and stable population of Salmonella for thermal inactivation studies. A moisture sorption isotherm was measured to understand the relationship between a and moisture content of milk powders. The thermal resistance of Salmonella was found to significantly increase as a decreased, which suggested that a higher temperature or longer processing time would be required at low a to achieve the desired inactivation of Salmonella. The microbial inactivation kinetics were not significantly different for the 2 milk powders; therefore, data were combined to develop a universal model. A response surface model was compared with a modified Bigelow model. The modified Bigelow model performed well to predict D-values [root mean square error (RMSE) = 1.47 min] and log reductions (RMSE = 0.48 log cfu/g). The modified Bigelow model developed here could be used to estimate D-value as a function of water activity and temperature to design a thermal pasteurization system for milk powders.

摘要

奶粉中沙门氏菌的存活导致了几起食源性疾病爆发。要确定适当的巴氏杀菌处理条件,需要了解沙门氏菌在奶粉中的热失活动力学。然而,关于水活度(a)和脂肪含量对奶粉中沙门氏菌热加工失活的影响,我们知之甚少。两种类型的奶粉,即脱脂奶粉和全脂奶粉,具有不同的脂肪含量(分别为 0.62%和 29.46%wt/wt),用含有 5 株沙门氏菌的鸡尾酒接种,并平衡到 3 个 a 水平(0.10、0.20 和 0.30),在 75、80 和 85°C 下进行等温处理,以获得 D 值(在等温处理温度下,细菌数量减少 10 倍所需的时间)和 z 值(达到 90%十进制减少时间 D 的温度升高)。稳定性测试表明,本研究中使用的接种方法为沙门氏菌的热失活研究提供了高且稳定的沙门氏菌群体。测量了水分吸附等温线,以了解奶粉 a 和水分含量之间的关系。发现沙门氏菌的耐热性随着 a 的降低而显著增加,这表明在低 a 下需要更高的温度或更长的加工时间才能达到期望的沙门氏菌失活效果。两种奶粉的微生物失活动力学没有显著差异;因此,数据被合并以开发通用模型。响应面模型与改良的 Bigelow 模型进行了比较。改良的 Bigelow 模型很好地预测了 D 值[均方根误差(RMSE)=1.47 min]和对数减少(RMSE=0.48 log cfu/g)。这里开发的改良 Bigelow 模型可用于估计 D 值作为水活度和温度的函数,以设计奶粉的巴氏杀菌系统。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验