State Key Laboratory of Safety and Control for Chemicals, SINOPEC Research Institute of Safety Engineering, Qingdao, Shandong, 266101, PR China.
State Key Laboratory of Safety and Control for Chemicals, SINOPEC Research Institute of Safety Engineering, Qingdao, Shandong, 266101, PR China.
Environ Pollut. 2020 Oct;265(Pt B):115026. doi: 10.1016/j.envpol.2020.115026. Epub 2020 Jun 17.
The accuracy and reliability of volatile organic compound (VOC) emission data are essential for assessing emission characteristics and their potential impact on air quality and human health. This paper describes a new method for determining VOC emission data by multipoint sampling from various process units inside a large-scale refinery. We found that the emission characteristics of various production units were related to the raw materials, products, and production processes. Saturated alkanes accounted for the largest fraction in the continuous catalytic reforming and wastewater treatment units (48.0% and 59.2%, respectively). In the propene recovery unit and catalytic cracking unit, alkenes were the most dominant compounds, and propene provided the largest contributions (57.8% and 23.0%, respectively). In addition, n-decane (12.6%), m,p-xylene (12.4%), and n-nonane (8.9%) were the main species in the normal production process of the delayed coking unit. Assessments of photochemical reactivity and carcinogenic risk were carried out, and the results indicate that VOC emissions from the propene recovery unit and catalytic cracking unit should be controlled to reduce the ozone formation potential; in addition, alkenes are precedent-controlled pollutants. The cancer risk assessments reveal that 1,2-dibromoethane, benzene, 1,2-dichloroethane, and chloroform were the dominant risk contributors, and their values were much higher than the standard threshold value of 1.0 × 10 but lower than the significant risk value defined by the US Supreme Court. Based on the VOC composition and a classification algorithm, the samples were classified into eight main groups that corresponded to different process units in the petroleum refinery. In conclusion, this work provides valuable data for investigating process-specific emission characteristics of VOCs and performing associated assessments of photochemical reactivity and carcinogenic risk in petrochemical refineries.
挥发性有机化合物 (VOC) 排放数据的准确性和可靠性对于评估排放特征及其对空气质量和人类健康的潜在影响至关重要。本文描述了一种从大型炼油厂内部的多个工艺单元进行多点采样来确定 VOC 排放数据的新方法。我们发现,不同生产单元的排放特征与原材料、产品和生产工艺有关。饱和烷烃在连续催化重整和污水处理单元中占比最大(分别为 48.0%和 59.2%)。在丙烯回收单元和催化裂化单元中,烯烃是最主要的化合物,丙烯的贡献最大(分别为 57.8%和 23.0%)。此外,正十二烷(12.6%)、间二甲苯(12.4%)和正壬烷(8.9%)是延迟焦化单元正常生产过程中的主要物质。对光化学反应性和致癌风险进行了评估,结果表明,丙烯回收单元和催化裂化单元的 VOC 排放应加以控制,以降低臭氧形成潜力;此外,烯烃是优先控制的污染物。致癌风险评估表明,1,2-二溴乙烷、苯、1,2-二氯乙烷和三氯甲烷是主要的风险贡献者,其值远高于 1.0×10 的标准阈值,但低于美国最高法院定义的显著风险值。基于 VOC 组成和分类算法,将样品分为八个主要组,对应于炼油厂中的不同工艺单元。总之,这项工作为研究石化厂特定工艺的 VOC 排放特征以及进行相关的光化学反应性和致癌风险评估提供了有价值的数据。