Pourakbar Mojtaba, Behnami Ali, Mahdavianpour Mostafa, Dariyan Fatemeh Shokri, Aghayani Ehsan
Department of Environmental Health Engineering, Maragheh University of Medical Sciences, Maragheh, Iran.
Health and Environment Research Center, Tabriz University of Medical Sciences, Tabriz 5166614711, Iran.
MethodsX. 2020 Jun 20;7:100970. doi: 10.1016/j.mex.2020.100970. eCollection 2020.
Biological wastewater treatment processes are among the environmentally friendly techniques for degradation of organic compounds. They are also preferred to the physical and chemical processes which are due to the ability of biological processes to treat wide range of organic compounds with lower operational costs. However, biological processes are usually affected by variation in the inlet wastewater quality and quantity. In order to investigate the performance of the wastewater treatment plant, various parameters in case of effluent quality such as COD, BOD, TSS, TDS etc. are required to be measured. Microorganisms in bioreactors use various enzymes to degrade the organic contaminants. Higher toxic organic load on the biological process may lead to the deterioration of the process performance which is due to the reduction in microbial activity of the biomass. Dehydrogenase enzyme produced in biological processes could be used as an indicator for the biological wastewater treatment. Present study introduces a simple and modified method for evaluation of biological wastewater treatment process measuring dehydrogenase activity. In the present study, the effective parameters such as incubation time and types of solvent were investigated and the best procedure is developed for measuring the dehydrogenase activity in biological wastewater treatment process.
生物废水处理工艺是降解有机化合物的环保技术之一。与物理和化学工艺相比,它们更受青睐,因为生物工艺能够以较低的运营成本处理多种有机化合物。然而,生物工艺通常会受到进水废水质量和数量变化的影响。为了研究污水处理厂的性能,需要测量出水水质的各种参数,如化学需氧量(COD)、生化需氧量(BOD)、总悬浮固体(TSS)、总溶解固体(TDS)等。生物反应器中的微生物使用各种酶来降解有机污染物。生物工艺中较高的有毒有机负荷可能会导致工艺性能恶化,这是由于生物质的微生物活性降低所致。生物工艺中产生的脱氢酶可作为生物废水处理的指标。本研究介绍了一种简单且经过改进的方法,用于评估生物废水处理工艺中脱氢酶的活性。在本研究中,研究了诸如孵育时间和溶剂类型等有效参数,并开发了用于测量生物废水处理工艺中脱氢酶活性的最佳程序。